Specifications

5
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
SNOWTHROWER ERSKINE MODEL 1600***
STAGE
2
WIDTH OF CUT
53" (135 cm)
CUTTING HEIGHT
22" (56 cm)
CUTTING EDGE
51" (130 cm) bolt-on
SKID SHOES
Adjustable/Hardened
AUGER DIAMETER
12" (30 cm) open flight
FAN DIAMETER
16" (41 cm)
CHUTE ROTATION
Hydraulic
SHEAR PROTECTION
Pressure relief
CASTING DISTANCE
Up to 25' (7.62 m)
APPROXIMATE SHIPPING
WEIGHT
418 lbs. (190 kg)
HOSES
Included
Groundsmaster
®
3280-D Attachments Specifications
*
(continued)
CAB, MODEL 30298 (Available June 2015)
BODY/FRAME
ROPS certified cab (ISO 21299); rubber sound isolator
cab mounts; fold away exterior side mirrors. (Optional
road light kit and rotating beacon kit available.)
GLASS
Full glass rear window and both doors, tinted
(50%); front and rear windows open andact as an
emergency exit using quick release latch. Heavy-duty
pantograph front windshield wiper and washer.
INTERIOR
Interior mirror, upholstered panels, textured TPE
ripple rubber floor mat, dome light.
HVAC
Pressurized heater/fan.
SAFETY CERTIFICATIONS
American National Standards Institute (ANSI B71.4-
2012) and applicable ISO EN 5395 (CE) (machine
directive 89/392, 91/368, 93/44, 84/538, 89/336)
requirements; Optional lights. Meets ANSI/ASAE
5279.12 (Lighting and Marking of Agricultural
Equipment on Highways).
DEBRIS BLOWER, MODEL 30823
POWER SOURCE
Groundsmaster 3280 tractor's-PTO drive. Belt drive.
HITCH/MOUNT
Out-front design for Groundsmaster tractors (requires Attachment
Frame Kit, PN 110-8540).
FRAME
All welded steel construction.
BEARINGS
2 self-sealed, self-aligning.
IMPELLER
12 blades, reversed curve, 21" (53.3 cm) diameter,
sandcast aluminum.
AIR MOVEMENT
130 mph (209 km/h)@ 2700 rpm, 3650 cfm
DIRECTIONAL CHUTE
All steel, over-center locking, spring tension control,
operated from tractor seat.
DIMENSIONS
Length Width Height
46" (117 cm) 35.6" (90 cm) 34.9" (89 cm)
SHIPPING WEIGHT
300 lbs. (136 kg)
ROTARY BROOM M-B MODEL MCT**
TYPE
MECHANICAL
Windrow type, front mounted mechanical drive
broom. Hydraulic angling, 30 degrees left and right.
SWING
Swing pivot point inline with 50 degree CV joint
BROOM SIZE
25" (63.5 cm) diameter brush,
60" (152 cm) width.
BRUSH
Sectional brush with choice of polypropylene, wire or combination
radial segments.
SHIPPING WEIGHT
60" Broom: 500 lbs., (227 kg).
OPTIONS
Hydraulic Swing Cylinder, Dirt Deflector, Storage
Stands.
SUNSHADE
UNIVERSAL MOUNT
Model 30349
BIMINI CANVAS
Model 30358
15 CU. FT. HI-LIFT HOPPER COLLECTION SYSTEM,
MODEL 30356
CONFIGURATION
A turf collection system consisting of a pivoting three-point,
quick detach mounting structure that supports the lift linkage and
hydraulically raises to dump collected clippings.
WHEEL WEIGHT
75 lb. (34 kg) wheel weight mounts to the left front
wheel to offset RH hopper weight.
HOPPER CAPACITY
15 cu. ft. (440 liters)
V-PLOW, MODEL 30750
CUTTING WIDTH
48" (121.9 cm)
HITCH/MOUNT
Out-front design for Groundsmaster tractors.
Required kits are the following:
V-Plow Mounting Kit, PN 115-4917 and Attachment
Frame Kit, PN 110-8540.
CONSTRUCTION
All welded steel.
GM300 DEBRIS BLOWER RETROFIT KITS
Converts model 30855 for the GM3280-D/ 3320. Required kits are the following: PN 110-
8539: Blower Adapter Kit, and PN 110-8540: Attachment Frame Kit.
* Information regarding non-Toro (Allied Vendor) products is included in the Toro Golf and Grounds Equipment Guide as a
convenience to Toro customers. Toro does not warrant, endorse or support any products purchased from Allied vendors.
Additionally, Toro shall not be responsible for any personal injury or property damage, whether direct or consequential, caused
by such Allied products. Toro does not certify fit up, compatibility or functionality of Allied products.
**Manufactured by M-B Companies, Inc.
*** Manufactured by Erskine. Depending on mower configuration, an auxiliary
valve kit (Toro model 110-5670) must be added to the tractor. Addition wheel
weights may be required. The Toro Company does not manufacture or sell the
snowthrower, nor does Toro guarantee these accessories in any manner whatsoever.
52" BLOWER KIT, MODEL 30502
60" BLOWER KIT, MODEL 30357
BLOWER ASSEMBLY
Blower assembly housing is 16" (41 cm) diameter; welded construction. The blower
assembly attaches to the cutting unit's discharge port and is belt driven from the
cutting unit. Impeller speed is 1800 rpm at 3200 rpm engine speed. Impeller shaft
bearing is outboard mounted.
DECK BAFFLES
Steel baffles mount under deck housing to direct clippings into blower.
BUMPER
Bumper of steel tubing is bolted to deck suspension frame to protect blower housing.
Note: Use with high lift collection system