Brochure

Specifications for Groundsmaster
®
3500-D
Products depicted in this brochure are for demonstration purposes only.
Actual products offered for sale may vary.
©2004 The Toro Company, 8111 Lyndale Ave. S., Bloomington, MN 55420-1196
Part No. 04-040-T. Printed in U.S.A.
Toro.com
Engine
Model: Kubota
®
3-cylinder, turbo-charged
Rating: 35 hp (26.1 kW) gross, 32 hp (23.9 kW) @ 2800 rpm
Displacement: 67.1 cu. in. (1.1 liter)
Fuel: Diesel
Cooling: Liquid
Traction Unit
Drive: 3WD, Series/Parallel,
™
hydrostatic, closed-loop
Hydraulic capacity: 3.5 gallon (13.2 liter)
Fuel capacity: 11 gallon (42 liter)
Brakes: Dynamic braking through hydrostatic transmission
service brake, parking brake
Tires
Front: 20 x 12-10, 4-ply, Turf Trac
Rear: 20 x 10-10, 4-ply, Turf Trac
Ground Speed
Mowing: 0-6 mph (0-10 km/h) forward,
0-4 mph (0-6 km/h) reverse
Transport: 0-9 mph (0-14 km/h) forward,
0-4 mph (0-6 km/h) reverse
Operator Station
Steering: Power, tilt wheel
Controls: Foot-operated traction pedal, hand-operated throttle,
mow/transport foot lever, joystick for cutting unit raise/lower
and Sidewinder,
™
cutting unit transport lock, hand-actuated
parking brake and switch for deck engagement
Gauges: Hour meter, fuel, engine coolant temperature
Indicator lights: High temperature, low oil pressure, charge
indicator, glow plug, amp
Shutdown: High coolant temperature
Electrical
Battery: 12 volt, 585 cold cranking amps
Alternator: 40 amps
Interlocks: Operator in seat, PTO, mow/transport, neutral pedal,
parking brake
Dimensions & Weight
Height: 70.8" (180 cm) w/ROPS
Length: 116" (295 cm)
Width: 71.8" (182 cm) with 68" (173 cm) WOC;
75.8" (193 cm) with 72" (183 cm) WOC
Wheelbase: 59.5" (151 cm)
Ground clearance: 6" (15.3 cm)
Weight: 2,200 lbs. (1,100 kg) with cutting units
Cutting Decks
Type: Three Contour
™
Plus, 27" (69 cm) rear-discharge rotary with
rear rollers
Sidewinder
®
: Cutting units travel 12" (30 cm) left or right
from center, 24" (61 cm) total travel
Width of cut: 68" (173 cm) standard, 72" (183 cm) optional
Height of cut: .75-4" (1.9-10.2 cm) in .25" (.6 cm) increments
Overlap: 7" (17 cm) at standard width of cut
Mowing rate: 4.1 acres/h (1.7 hectares/h) at 6 mph (10 km/h)
Ground following: 6" (15 cm) anti-scalp cups on blades,
rollers on decks
Certification: ANSI B71.4-1999, meets applicable CE requirements
Warranty: Two-year limite d
TORO
®
PROFESSIONAL SERVICES
Toro Financing A full service offering for all your equipment and
irrigation purchases. Flexible financing options can be tailored to
meet your operational needs.
Toro Protection Plus Extended Protection Plan Protect your
budget and your equipment investment. Plans are available for both
new and used equipment, and you can choose from various terms to
fit your financing terms.
Toro Genuine Parts Keep the productivity and performance of your
equipment at its peak. Learn about Performance Parts pricing and
MVP kits. Find replacement parts online at Toro.com/partsviewer.
Toro Training Toro Factory Service Schools are available. Explore the
training and customer care areas of Toro.com and ToroNSN.com for
readily available education and training materials.
Toro Controller Repair Provides irrigation controller boards ready
for immediate board exchange to assure that downtime is minimal
and your turf stays protected. Toro is the choice for reliability.
Toro NSN
®
An industry-first support network that provides reliable,
around-the-clock irrigation central control system troubleshooting
and operation assistance. Call 1-800-ASK-TORO.