Sell Sheet

Groundsmaster
®
360 Specifications*
GROUNDSMASTER 360 – 2WD
TIER 4 INTERIM DIESEL
MODELS 30534(N), 30536(N)
GROUNDSMASTER 360 – 4WD
TIER 4 INTERIM DIESEL
MODELS 30837(N), 30839(N)
GROUNDSMASTER 360 – CAB
TIER 4 INTERIM DIESEL
MODELS 30540(N), 30542(N)
ENGINE
Kubota
®
1505 4-cylinder, liquid-cooled diesel engine, 36 hp (26.8 kW) @ 3000 rpm. EPA Tier IV Interim Compliant.
FUEL CAPACITY
13.5 gallons (51.1 liters) diesel. Biodiesel Ready for use up to B-20 (20% biodiesel and 80% diesel blend).
TRACTION DRIVE
Independent high-torque, low-speed wheel motors with 280 cc displacement.
Dual pump hydrostatic drive system with optional
differential lock.
CrossTrax
®
drive system utilizing series parallel hydraulic drive circuit with full time forward and reverse
4WD. Patent pending.
TIRES
Front & Rear: (All 4 tires and wheels are the same part number) 23/10.5x12 6 ply pneumatic tubeless, demountable and interchangeable. Tread Kenda K500 TL
similar to “Toro Tuff Trac”.
AIR CLEANER
Dry, replaceable primary element.
GAUGES
Hour meter, fuel gauge, indicator lights for glow plugs, high coolant temperature, battery charge, and low oil pressure.
Automatic shutdown for high coolant temperature. Two wheel steer lockout indicator light on 4WD units.
CONTROLS
Ignition switch, hand-throttle, foot-operated traction pedal with mowing speed control stop, service brake with parking brake latch, switch for raising and lowering
cutting unit.
GROUND SPEED
Transport and Mow: Forward 0-14 mph (0-22.5 km/h), variable. Reverse 0-8.5 mph (0-13.7 km/h), variable.
RADIATOR
Rear mount, cross flow, 6.5 fins per 1” (25 mm), 8 quart (7.6 liter) capacity
MAIN FRAME
Rectangular structured steel tube and high strength steel plate welded construction.
BRAKES
Service Brake: Foot pedal with dynamic braking through hydrostatic transmission. Parking Brake: foot actuated brake lever with
two 8” (20.3 cm) diameter drum brakes mounted on the rear wheel motors.
STEERING
Quad Steer™ all wheel steer with four wheel Ackermann steering. Two turns Lock to Lock controlled via steering wheel and automatic synchronizing hydraulic cylinders. 4WD models
have rear wheel steer lock out position, providing front two wheel steering (2WS).
ELECTRICAL
12-volt, 60 amp internal regulated alternator/generator charging @ 3150 rpm. Battery: BCI Group No. 34, 690 cold cranking amps @ 0° F (-17.78° C).
INTERLOCKS
Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat with deck engaged, engine stops. If operator leaves
the seat with the unit out of neutral, engine stops. Engine stops if parking brake engaged and traction pedal not in neutral. High temp (PTO shuts down but engine
remains running), Over temp (engine shuts down).
SEAT
High back cushion vinyl seat with drain hole, deluxe low profile mechanical suspension, 4” (10 cm) fore-
aft travel with an additional 44 mm (1.75”) foreword adjustment, armrests standard, retractable seat belt,
lateral shock absorption.
Grammer low profile air ride suspension, cloth
cushions, retractable seat belt, lateral shock
absorption.
OPERATOR AREA
Operator platform with isolated operator seat (all models). Storage area behind operator seat, 12-volt power outlet, cup holder.
HYDRAULICS/COOLING
3 gallon (11.4 liter) capacity, suction spin-on filter mounted to transmission, oil cooler 6.5” x 17”x 3.5” (16.5 cm x 43.2 cm x 8.9 cm).
Bar and Plate Core; 6.5 serpentine fins per 1” (25 mm).
PTO CLUTCH
Hydraulically actuated wet multi disc clutch.
ROLL-OVER PROTECTION
2 post Standard foldable ROPS certified per ISO/DIS 21299.2 specifications Cab ROPS certified
ALL-SEASON
SAFETY CAB
Factory installed, ROPS certified, pressurized cab with AC and heat. Tempered curved windshield, opening side window, opening rear window, emergency exit side
window, tinted side and rear glass; front wiper/washer; interior mirror and exterior side mirrors; SMV sign; interior dome light. Models 30540, 30541 & 30542 only.
FUEL ECONOMY
3.5 acres/gallon (.38 hectares/litre)*, fuel consumption: 1.4 gallons/hr (5.3 litres/h)**
SAFETY
Complies with American National Standards Institute (ANSI B71.4-2004)
CERTIFICATION
Certified to meet SAE J2258. Certified to meet ISO/DIS 21299 for ROPS. Engine meets all applicable emission standards per the manufacturer. Certified to meet
C-Tick 2004/108/EC/(EMC). Certified to meet the CE Machinery Directive.
WARRANTY
Two year limited
DIMENSIONS & WEIGHT WITH CUTTING DECKS
HEIGHT ROPS UP
78” (198 cm) 78” (198 cm) 86” (218 cm)
OVERALL LENGTH
110” (279 cm) 110” (279 cm) / 117” (297 cm) with front Quick Attach System
TM
(QAS) only
OVERALL WIDTH
78” (198 cm) [72” (183 cm) base deck] / 75” (191 cm) [72” (183 cm) side discharge deck] / 55” (140 cm) wheel to wheel
WHEELBASE
57” (145 cm)
EST. SHIPPING WEIGHT
2,562 lbs. (1162 kg) 2,658 lbs. (1206 kg) 3,134 lbs. (1422 kg)
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.