Groundsmaster® 360 Quad-Steer™ The Toro Groundsmaster 360 utilizes revolutionary Quad-Steer™ all wheel steering to maximize productivity. Climb hills without slipping. Make 180° turns without tearing turf. Hug the turns or side hills while mowing in total comfort. Save time without sacrificing quality. Intuitive controls and unparalleled maneuverability turn work into play. But this is no toy. It’s a performer in every sense of the word. A higher quality of cut, speed and efficiency, lasting dependability.
Groundsmaster® 360 2WD Specifications* GROUNDSMASTER 360 – 2WD, TIER 4 DIESEL, MODEL 31201 ENGINE FUEL CAPACITY TRACTION DRIVE TIRES AIR CLEANER GAUGES CONTROLS GROUND SPEED RADIATOR MAIN FRAME BRAKES STEERING Kubota, 3-cylinder, liquid-cooled diesel. Power: 24.8 hp (18.5 kW) gross, at rated speed of 3000 rpm. Torque peak: 71.5 (52.7) Nm (lbs-ft) @ 2200 rpm. Displacement: 1123cc. High idle: 3200 rpm no load (uninstalled) 3100-3200 installed. Remote-mounted 5" Donaldson® air cleaner.
Groundsmaster® 360 2WD Specifications* CUTTING DECKS HEIGHT OF CUT 72” SIDE DISCHARGE CONST. 72” BASE DECK CONST. FINE CUT GUARDIAN® COMPLETION KIT SPINDLE ASSEMBLY CUTTER DRIVE BLADES DECK SUSPENSION BELT IDLER DECK SKID ANTI-SCALP CUPS 1”-6” (25 - 152 mm) adjustable in 0.25” (6 mm) increments 7-gauge (4.5 mm) 5.5” steel (14 cm) deep; welded deck with grass discharged on the right side. An 5/16” (8 mm) thick rubber discharge chute covers the discharge opening to limit the throw distance of clippings.
Groundsmaster® 360 4WD Specifications* GROUNDSMASTER 360 – 4WD TIER 4 FINAL DIESEL, MODEL 31200(A) ENGINE FUEL CAPACITY GROUNDSMASTER 360 – CAB TIER 4 FINAL DIESEL, MODEL 31202 Yanmar; 3-cylinder common-rail, liquid-cooled, diesel with EGR and diesel particulate filter (DPF), 36.8hp (27.5 Kw) rated @ 3000 rpm, 80 ft-lbs @ 1950 rpm, High idle 3000 rpm, Low idle 1400 rpm, displacement 1642 cc. Remote mounted Donaldson air filter, external spin-on oil filter and high flow fixed fan.
Groundsmaster® 360 4WD Specifications / Attachments* 100" CUTTING DECK, MODEL 31101 (ONLY mounts to 31200(A)) WIDTH OF CUT HEIGHT OF CUT DECK CONSTRUCTION DISCHARGE WING DECK ARTICULATION SPINDLE ASSEMBLY CUTTER DRIVE BLADES BLADE TIP SPEED DECK SUSPENSION CASTOR WHEELS BELT IDLER DECK SKID DECK ANTI-SCALP ROLLERS ANTI-SCALP CUPS DECK COVERS CUTTING DECK DEPTH WING DECK TRANSPORT LOCKS WEIGHT WIDTH OPTIONAL ACCESSORIES CERTIFICATION MOWING RATE 100" (254cm), by five blades 1”-5” (25 - 127 mm) adjustable in
Groundsmaster® 360 4WD Specifications / Attachments* GROUNDSMASTER 360 – 4WD TIER 4 FINAL DIESEL, MODEL 31200(A) AIR RIDE GRAMMER SEAT Air ride suspension and vinyl cushions. Model 30511. GROUNDSMASTER 360 – CAB TIER 4 FINAL DIESEL, MODEL 31202 Standard SPEED REDUCTION KIT Model 30287 (F'15 and newer models) ROTATING BEACON KIT Part No.
Groundsmaster® 360 4WD Specifications / Attachments* CUTTING DECKS (Sold Separately) 72" DECK W/ GUARDIAN® KIT OR FINE CUT GUARDIAN® KIT 72" SIDE DISCHARGE 72" DECK W/ REAR DISCHARGE KIT 60" SIDE DISCHARGE 62" DECK W/ GUARDIAN® RECYCLER KIT 30353 30481 30353 30456 30457 COMPLETION KIT (REQUIRED) (BLADES AND BAFFLES) 30304 or 30346 NA 30549 NA 30306 WIDTH OF CUT 72" (182.8 cm) 72" (182.8 cm) 72" (182.8 cm) 60”(152.4 cm) 62" (158 cm) BLADE TIP SPEED (@3250 ENGINE RPM) 16,000±1,000 ft.
Groundsmaster® 360 4WD Attachments Specifications* SNOWTHROWER, ERSKINE MODEL 1600** STAGE WIDTH OF CUT CUTTING HEIGHT CUTTING EDGE SKID SHOES AUGER DIAMETER FAN DIAMETER CHUTE ROTATION SHEAR PROTECTION CASTING DISTANCE APPROXIMATE SHIPPING WEIGHT HOSES ROTARY BROOM, M-B MODEL MCT*** 2 TYPE 53" (135 cm) 22" (56 cm) SWING 51" (130 cm) bolt-on BROOM SIZE Adjustable/Hardened BRUSH 12" (30 cm) open flight 16" (41 cm) SHIPPING WEIGHT Hydraulic OPTIONS Pressure relief MECHANICAL Windrow type, fron
Groundsmaster® 360 4WD Attachments Specifications* Aera-vator Universal Shaft System Frame** WEIGHT (FRAME ONLY)† WORKING WIDTH CENTER DRIVE GEARBOX END DRIVE TINE VIBRATION FREQUENCY HEAVY DUTY LIFT/TRAIL HITCH DRIVE LINE FINISH † Aera-vator Shaft AERA-VATOR SHAFTS SHAFT ACCESSORY USE Vibrating tines loosen dry soil by fracturing - no holes, no plugs, no pre-irrigation WIDTH SHAFT WEIGHT† 60" (152.4 cm) 1:1 Right Angle 4 “BX” 46 Belts (Each End) @540 PTO RPM = 800 Cycles/Min 3 ft (91.