Specifications

19
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
Groundsmaster
®
4000-D/4010-D Specifications
*
GROUNDSMASTER 4000-D, TIER 4 DIESEL, MODEL 30609
GROUNDSMASTER 4010-D, TIER 4 DIESEL MODEL 30636, Model 30607
ENGINE
Yanmar® 4-cylinder, liquid-cooled, turbo-charged diesel. 127 cu. in. (2.1 liter) displacement. Engine rated at 55 hp (41 kW) net and 125 ft.-lbs. (169 Nm) torque at
2,000 rpm. 8 quart (7.6 liter) oil capacity. EPA Tier IV Final Compliant
AIR CLEANER
Dry, replaceable primary and safety elements.
RADIATOR
Rear-mount, cross-flow, 7-row, 6.3 fins per inch, 9 quart (8.5 liter) capacity.
FUEL CAPACITY
21 gallons (79.5 liters) diesel fuel. Biodiesel-Ready for use up to B-20(20% biodiesel and 80% petroleum blend)
TRACTION DRIVE
Parallel hydrostatic, closed loop system with full-time 4WD. Forward/reverse in low (mow) and high (transport) range with full-time, automatic traction assist (forward
only) standard on Groundsmaster 4000-D models. Variable displacement piston pump with electronic servo control powers dual speed displacement piston motor drive
into double reduction planetary in front, and mechanical axle in rear. SmartPower
TM
feature controls traction speed to maintain optimal cutting blade speed.
HYDRAULICS/COOLING
8.75 gallon (33.1 liter) capacity with 10 micron remote spin-on filter. 9 row, single pass cooler, 6.3 fins per inch, that tilts out for cleaning. Variable speed radiator
cooling fan with automatic (based on coolant and oil temps) and manual reversing capabilities.
DIAGNOSTICS
Diagnostic pressure test ports: forward and reverse traction, left, center and right decks, reverse 4WD, lift, steering, charge and deck counterbalance circuits.
GROUND SPEED
Transport: 0-16.2 mph (0-26.1 km/h) forward, 0-8.1 mph (0-13 km/h) reverse. Mow: 0-8.3 mph (0-13.4 km/h) forward, 0-4 mph (0-6.4 km/h) reverse.
TIRES
Front: 26 x 12-12, 6-ply tubeless Multi-Trac. Rear: 20 x 10-10, 6-ply tubeless Multi-Trac.
MAIN FRAME
All welded formed-steel frame with integral tie-down anchors.
BRAKES
Mechanically actuated, internal wet disc brakes on input to each planetary drive. Individual foot-operated steering brake control of left and right wheel. Lock pedals
together and latch to engage parking brake.
SEAT
4-way adjustable, right armrest travels with seat and suspension.
STEERING
Power steering with dedicated power source. Steering wheel tilts to desired operator position. Uncut circle: 0" diameter.
INTSTRUMENTATION
InfoCenter™: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics. Indicates fuel level, coolant temp, intake
temperature, low oil pressure, alternator, engine hours, engine rpm, hydraulic oil temperature, voltage
CONTROLS
Tilt steering, ignition switch, throttle switch, foot-operated traction pedal, lockable individual brake pedals, parking brake lock, mow/transport speed selector switch,
3-two position switches for individual deck lift/lower, counterbalance adjustment, tow valves, cup holder, toolbox, radio holder, fan switch and 12-volt power outlet.
ELECTRICAL
12-volt, 690 cold cranking amps battery, 80 amp alternator (4010-D). Overload protection with automotive type fuses.
INTERLOCKS
Prevents engine from starting unless traction pedal is in neutral and deck is disengaged. If operator leaves seat while moving or deck is engaged, traction and /
or deck stops, info center alarms and gives message. Mowing only permitted in low range. Traction not allowed if parking brake engaged and pedal moved out of
neutral, info center alarms and gives message. Deck transport latches.
GROUND CLEARANCE
6.5" (16.5 cm)
OVERALL DIMENSIONS
Height Length Width Transport Width Wheelbase
85" (216 cm) w/ROPS up 135" (343 cm) 136" (346 cm) 71" (180 cm) 55.5" (140 cm)
93.9” (237 cm) w/ cab w/decks down w/decks down @ 2" (5 cm) HOC
WEIGHT
4205 lbs. (1907 kg) w/ full fluids (GM4000). 4759 lbs. (2159 kg) w/ full fluids (GM4010).
SAFETY CAB (4010)
MODEL 30636: ROPS certified cab with heat, AC and the following standard features: climate system pressurized cab, heavy-duty pantograph front windshield wiper
and washer, front windshield has 38” of visibility, interior mirror, fold away exterior side mirrors, molded front fenders, right and left doors and rear window have
tinted (50%) glass, front and rear windows open, quick release window latches act as emergency exit, rubber sound isolator cab mounts and upholstered interior
panels and headliner, textured neoprene floor mat, interior dome light.
MODEL 30607: Factory installed, ROPS certified, climate controls (AC & heating), opening rear window, front wiper/washer, interior mirror, exterior side mirrors.
SAFETY
Complies with American National Standards Institute (ANSI B71.4-2012) and applicable ISO EN 5395 (CE) (machine directive 89/392, 91/368, 93/44, 84/538, 89/336)
requirements; Optional lights. Meets ANSI/ASAE 5279.12 (Lighting and Marking of Agricultural Equipment on Highways). Foldable ROPS, ISO 21299 certified.
WARRANTY
Two-year limited warranty. Refer to operator’s manual for further details.
ACCESSORIES
Work light, Road lights consisting of dual taillights, dual headlights, slow moving vehicle sign, turn signal, flasher and lights; Sunshade Beacon
CUTTING DECKS
WIDTH OF CUT
Overall: 132" (335 cm), Front: 62" (157.5 cm), Wings: 42" (106.7 cm), Overlap: 7" (12.8 cm).
MOWING RATE
Mows up to 11.0 acres/h (4.5 hectares/h) at 8.5 mph (13.4 km/h) (assumes no overlap or stops).
CONSTRUCTION
Welded .100" (25 mm) steel with 7 and 10-gauge steel channel and plate reinforcements, bullnose bumpers.
DECK DRIVE
Direct mounted hydraulic motor into spindle. Remaining spindle(s) driven by individual B section kevlar belt. Quick release belt covers.
HEIGHT-OF-CUT
1"-5" (25-127 mm) in .5" (13 mm) increments.
SPINDLES
1.25" (3.17 cm) diameter spindle shafts, 9" (22.9 cm) diameter conical ductile iron housing, and 2 greaseable tapered roller bearings.
BLADES
21.75" (55.2 cm) long, 2.5" (6.4 cm) wide, .25" (.64 cm) thick.
CASTER WHEELS
8 x 3.50-4, 4-ply, smooth, pneumatic, sealed precision ball bearings.
GROUND FOLLOWING
6" anti-scalp cups on each blade, adjustable skids on each deck, 4 anti-scalp rollers on front deck and 1 on each wing.
WING PROTECTION
Bi-directional, impact absorption device on each wing deck.
RECYCLER
®
KIT
Model 30420 will convert decks into Guardian® Recycler® decks.
MULCHING KIT
Model 30422.
SKIDS
Reversible polymetric.
The Groundsmaster 4000-D & 4010-D are manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products
offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.