Sell Sheet

INFINITY
™
34/54 SERIES ROTORS
INF54 Series Performance Chart—25°
Front
Nozzle
Positions
Nozzle Set 51
(Yellow)
Nozzle Set 52
(Blue)
Nozzle Set 53
(Brown)
Nozzle Set 54
(Orange)
Nozzle Set 55
(Green)
Nozzle Set 56
(Gray)
Nozzle Set 57
(Black)
Nozzle Set 58
(Red)
Nozzle Set 59
(Beige)
102-0725 102-7001 102-0727 102-7002 102-6908 102-0730 102-4261 102-4260 102-4259
Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Red Plug Brown Red Plug Brown Red Plug Red Plug
102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-4335 102-6883 102-4335 102-6883 102-4335 102-4335
Back
Nozzle
Positions
Yellow Blue Yellow Orange Yellow Red Yellow Beige Yellow Beige Yellow Red Yellow Gray Yellow Gray Yellow Gray
102-6937 102-2925 102-6937 102-2926 102-6937 102-2928 102-6937 102-2929 102-6937 102-2929 102-6937 102-6944 102-6937 102-6945 102-6937 102-6945 102-6937 102-6945
PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 58 13.2 59 15.7 64 22.0 70 26.2 — — — — — — — — — —
65 60 14.8 61 17.5 68 24.8 74 29.3 79 34.2 — — — — — — — —
80 61 16.4 64 20.0 72 27.6 78 32.6 83 38.0 85 40.7 87 44.9 91 50.2 96 55.6
100 63 18.1 67 23.6 75 30.4 81 36.7 87 42.5 90 45.8 93 50.2 95 55.4 99 61.8
INF54 Series Performance Chart—15°
PSI Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM Radius GPM
50 52 13.2 53 15.6 61 22.0 65 26.0 — — — — — — — — — —
65 53 14.8 54 17.1 63 24.8 67 29.2 69 34.1 — — — — — — — —
80 56 16.4 58 19.0 68 27.6 72 32.5 75 37.8 79 40.4 81 44.6 85 49.9 87 55.3
100 58 18.1 60 20.5 71 30.4 75 36.4 79 42.3 84 45.5 87 49.9 89 55.1 94 61.5
Stator 102-6929 Blue 102-1940 White 102-1941 White
Conversions INF54-5154 INF54-5558 INF54-59
■ Not recommended at these pressures. Radius shown in feet.
Toro recommends the use of a 1
1
⁄4" swing joint at flows over 25-GPM (95-LPM).
Sprinkler radius data collected in Toro’s zero wind test facility per ASAE standard S398.1.
Actual site conditions must be considered when selecting the appropriate nozzle.
All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
INF54 Nozzle Apex
Pressure Nozzle Apex at 15˚ Apex at 25°
65 PSI
51 6’ @ 51’ 13’ @ 54’
52 6’ @ 51’ 11’ @ 64’
53 7’ @ 59’ 13’ @ 68’
54 8’ @ 63’ 15’ @ 74’
55 9’ @ 66’ 15’ @ 76’
80 PSI
56 8’ @ 75’ 18’ @ 83’
57 9’ @ 74’ 19’ @ 82’
58 10’ @ 82’ 18’ @ 87’
59 11’ @ 81’ 21’ @ 91’
Main Nozzle Adapter
A wide assortment of
intermediate and inner nozzles
for use in the main nozzle
adapter and back nozzle
position provide unmatched
nozzle flexibility.