Sell Sheet
INFINITY
™
34/54 SERIES ROTORS
Dual Trajectory - 25° or 15°
Provides two selections for
the main nozzle trajectory;
the 25 degree setting
provides maximum distance
of throw and the 15 degree
setting provides improved
wind performance, radius
reduction and obstacle
avoidance.
15°
25°
INF34 Conversion Upgrades
Models Description
• INF34-3134
• INF34-3537
• INF34-3134E
• INF34-3537E
INF34 w/31–34 Nozzles
(33 Nozzle Installed)
INF34 w/35–37 Nozzles
(35 Nozzle Installed)
INF34 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
INF34 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
INF54 Conversion Upgrades
Models Description
• INF54-5154
• INF54-5558
• INF54-59
• INF54-5154E
• INF54-5558E
• INF54-59E
• 102-5011
INF54 w/51–54 Nozzles
(53 Nozzle Installed)
INF54 w/55–58 Nozzles
(55 Nozzle Installed)
INF54 w/ 59 Nozzle installed
INF54 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
INF54 w/55–58 Nozzles
(55 Nozzle Installed), Effluent
INF54 w/ 59 Nozzle installed,
Effluent, 690 Adapter
allows you to upgrade
any 690 with INF54
conversions
Specifying Information—INF34 & INF54
INFX4-XXX-XX
Body
Inlet
Arc Nozzle
Pressure
Regulation*
Activation Type Optional
INFX 4 X X X X X
3—1"
5—1
1
⁄2"
4—Full Circle
INF34—31, 32, 33 , 34, 35, 36, 37
INF54—51, 52, 53, 54, 55, 56, 57, 58, 59
6—65 psi
8—80 psi
1—100 psi
1—Standard Solenoid
2—Spike Guard
™
Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
5—Integrated GDC Module w/DCLS
7—Effluent
Example: When specifying an INF34 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: INF34–346–2
* All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
Dimensions
• SMART ACCESS
®
Cover and
Compartment Diameter:
- INF34: 7
5
/8”
- INF54: 7
5
/8”
• Body height:
- INF34: 10”
- INF54: 11
3
/8”
• Weight:
- INF34: 4.22 lbs.
- INF54: 5.04 lbs.
• Pop-up height to nozzle: 3¼”
Features
• Dual Trajectory adjustment on main nozzle - 25° or 15°
• Constant velocity full circle drive
• Radius reduction screw can effectively reduce the sprinkler
throw down to 30’
Operating Specifications
• Inlet:
- INF34: 1” ACME
- INF54: 1½” ACME
• Radius:
- INF34: 52’ – 91’
- INF54: 52’ – 99’
• Flow Rate:
- INF34: 13.0 – 46.9 GPM
- INF54: 13.2 - 61.8 GPM
• Precipitation Rates:
- INF34: Minimum - .33”/hr; Maximum - .55”/hr
- INF54: Minimum - .33”/hr; Maximum - .61”/hr
• Pilot Valve: Selectable at 50, 65, 80 and 100 psi
• Recommended Operating Pressure Range: 65-100 psi
(maximum-150 psi and minimum-40 psi)
• Activation types – Electric Valve-in-Head:
- Standard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.30 A
n
Holding 0.20 A
- Spike Guard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.12 A
n
Holding 0.10 A
- Nickel-Plated Spike
Guard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.12 A
n
Holding 0.10 A
- DC Latching Solenoid
(DCLS):
n
Momentary low
voltage pulse
- Integrated GDC
Module w/DCLS:
n
Momentary low
voltage pulse
• Trajectory: 25° or 15°
Warranty
• Three years
• Five years when installed
with Toro Swing Joints
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5055-IG