Sell Sheet

INFINITY
™
35/55 SERIES ROTORS
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5054-IG
Dual Trajectory
The 25° setting
provides maximum
distance of throw
and the 15° setting
provides improved
wind performance,
radius reduction and
obstacle avoidance.
15°
25°
OR
Specifying Information—INF35 & INF55
INFX5-XXX-XX
Body
Inlet
Arc Nozzle
Pressure
Regulation*
Activation Type Optional
INFX 5 X X X X X
3—1"
5—1
1
⁄2"
5—Part-circle and
Full-circle
In One
INF35—30, 31, 32, 33 , 34, 35, 36, 37
INF55—51, 52, 53, 54, 55, 56, 57, 58, 59
6—65 psi
8—80 psi
1—100 psi
1—Standard Solenoid
2—Spike Guard
™
Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
5—Integrated GDC Module w/DCLS
7—Effluent
Example: When specifying an INF35 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: INF35–346–2
* All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
INF35 Conversion Upgrades
Models Description
• INF35-3134
• INF35-3537
• INF35-3134E
• INF35-3537E
INF35 w/31–34 Nozzles
(#3 Nozzle Installed)
INF35 w/35–37 Nozzles
(#5 Nozzle Installed)
INF35 w/31–34 Nozzles
(#3 Nozzle Installed), Effluent
INF35 w/35–37 Nozzles
(#5 Nozzle Installed), Effluent
INF55 Conversion Upgrades
Models Description
• INF55-5154
• INF55-5558
• INF55-59
• INF55-5154E
• INF55-5558E
• INF55-59E
• 102-5011
INF55 w/51–54 Nozzles
(#3 Nozzle Installed)
INF55 w/55–58 Nozzles
(#5 Nozzle Installed)
INF55 w/59 Nozzle
INF55 w/51–54 Nozzles
(#3 Nozzle Installed), Effluent
INF55 w/55–58 Nozzles
(#5 Nozzle Installed), Effluent
INF55 w/59 Nozzle,
Effluent 690 Adapter
allows you to upgrade
any 690 with INF55
conversions
Dimensions
• SMART ACCESS
®
Cover and
Compartment Diameter:
- INF35: 7
5
/8”
- INF55: 7
5
/8”
• Body height:
- INF35: 10”
- INF55: 11
3
/8”
• Weight:
- INF35: 4.26 lbs.
- INF55: 5.08 lbs.
• Pop-up height to nozzle: 3¼”
Nozzle Selection
• INF35 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 & 37)
• INF55 has nine nozzle
variations (51, 52, 53, 54,
55, 56, 57, 58 & 59)
• Three in-line nozzles,
rotating stream pattern
• Two back nozzle positions
• Stator variations: 3
• Radius reduction screw
363-4839 for fine tuning
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Operating Specifications
• Inlet:
- INF35: 1” ACME
- INF55: 1½” ACME
• Radius:
- INF35: 43’ – 83’
- INF55: 55’ – 92’
• Flow Rate:
- INF35: 8.2 – 47.3 GPM
- INF55: 14.1 – 61.3 GPM
• Precipitation Rates:
- INF35: Minimum - .41”/hr; Maximum - .45”/hr
- INF55: Minimum - .46”/hr; Maximum - .58”/hr
• Pilot Valve: Selectable at 50, 65, 80 and 100 psi
• Recommended Operating Pressure Range: 65-100 psi
(maximum – 150 psi and minimum – 40 psi)
• Activation types – Electric Valve-in-Head:
- Standard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.30 A
n
Holding 0.20 A
- Spike Guard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.12 A
n
Holding 0.10 A
- Nickel-Plated Spike
Guard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.12 A
n
Holding 0.10 A
- DC Latching Solenoid
(DCLS):
n
Momentary low
voltage pulse
- Integrated GDC
Module w/DCLS:
n
Momentary low
voltage pulse
• Trajectory: 25° or 15°