Sell Sheet

INFINITY
™
35-6/55-6 SERIES ROTORS
www.toro.com / e Toro Company, Irrigation Division / 5825 Jasmine Street, Riverside, CA 92504 / 877-345-8676 / Specications subject to change without notice / © 2015. All rights reserved / P/N 15-5053-IG
Dimensions
• SMART ACCESS
®
Cover and
Compartment Diameter:
- INF35-6: 7
5
/8”
- INF55-6: 7
5
/8”
• Body height:
- INF35-6: 10”
- INF55-6: 11
3
/8”
• Weight:
- INF35-6: 4.31 lbs.
- INF55-6: 5.13 lbs.
• Pop-up height to nozzle: 3¼”
Additional Features
• INF35-6 has eight nozzle
variations (30, 31, 32, 33,
34, 35, 36 and 37)
• INF55-6 has nine nozzle
variations (51, 52, 53, 54,
55, 56, 57, 58 and 59)
• Four in-line nozzles,
rotating stream pattern
• One back nozzle position
• Stator variations: INF35-6 – 3
and INF55-6 – 3
Warranty
• Three years
• Five years when installed with Toro Swing Joints
Specifying Information—INFINF35-6 & INF55-6
INFX5-XXX-X6X
Body
Inlet
Arc Nozzle
Pressure
Regulation*
Activation Type Trajectory Optional
INFX 5 X X X X 6 X
3—1"
5—1
1
⁄2"
5—Part-circle and
Full-circle
In One
INF35—30, 31, 32, 33 , 34, 35, 36, 37
INF55—51, 52, 53, 54, 55, 56, 57, 58, 59
6—65 psi
8—80 psi
1—100 psi
1—Standard Solenoid
2—Spike Guard
™
Solenoid
3—Nickel-plated Spike Guard Solenoid
4—DC Latching Solenoid (DCLS)
5—Integrated GDC Module w/DCLS
6—24-position
TruJectory
7—Effluent
Example: When specifying an INF35-6 Series Sprinkler with #34 nozzle, pressure regulation at 65 psi and Spike Guard you would specify: INF35-346-26
* All sprinklers are equipped with the selectable pilot valve that allows settings at 50, 65, 80 and 100 psi.
Note: Not all models available.
Trajectory – 24 Positions
From 7° - 30° in 1°
increments put water where
you want it. Adjust from
the top of the sprinkler in
seconds, wet or dry. This
flexibility lets you tackle
every obstacle on the
course; wind, trees, bunkers,
mounds and more.
7°
30°
INF35-6 Conversion Upgrades
Models
Description
• INF35-6-3134
• INF35-6-3537
• INF35-6-3134E
• INF35-6-3537E
INF35-6 w/31–34 Nozzles
(33 Nozzle Installed)
INF35-6 w/35–37 Nozzles
(35 Nozzle Installed)
INF35-6 w/31–34 Nozzles
(33 Nozzle Installed), Effluent
INF35-6 w/35–37 Nozzles
(35 Nozzle Installed), Effluent
INF55-6 Conversion Upgrades
Models Description
• INF55-6-5154
• INF55-6-5558
• INF55-6-59
• INF55-6-5154E
• INF55-6-5558E
• INF55-6-59E
• 102-5011
INF55-6 w/51–54 Nozzles
(53 Nozzle Installed)
INF55-6 w/55–58 Nozzles
(55 Nozzle Installed)
INF55-6 w/59 Nozzle installed
INF55-6 w/51–54 Nozzles
(53 Nozzle Installed), Effluent
INF55-6 w/55–58 Nozzles
(55 Nozzle Installed),
INF55-6 w/59 Nozzle installed,
Effluent 690 Adapter allows
you to upgrade any 690
with INF55-6 conversions
Operating Specifications
• Inlet:
- INF35-6: 1” ACME
- INF55-6: 1½” ACME
• Radius:
- INF35-6: 42’ – 92’
- INF55-6: 52’ – 100’
• Flow Rate:
- INF35-6: 7.1 – 45.3 GPM
- INF55-6: 13.9 - 61.1 GPM
• Precipitation Rates:
- INF35-6: Minimum - .37”/hr; Maximum - .53”/hr
- INF55-6: Minimum - .43”/hr; Maximum - .60”/hr
• Pilot Valve: Selectable at 50, 65, 80 and 100 psi
• Recommended Operating Pressure Range: 65-100 psi
(maximum -150 psi and minimum - 40 psi)
• Activation types – Electric Valve-in-Head:
- Standard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.30 A
n
Holding 0.20 A
- Spike Guard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.12 A
n
Holding 0.10 A
- Nickel-Plated Spike
Guard Solenoid:
n
24 VAC, 50/60 Hz
n
Inrush: 0.12 A
n
Holding 0.10 A
- DC Latching Solenoid
(DCLS):
n
Momentary low
voltage pulse
- Integrated GDC
Module w/DCLS:
n
Momentary low
voltage pulse
• Trajectory: 25° or 15°