User manual

Groundsmaster 4500--D/4700--DHydraulic System Page 4 -- 136
Lift Control Manifold Service (GM 4700--D)
1. Manifold body
2. Nut
3. Zero leak plug (#4)
4. Relief valve (port R1)
5. Proportional relief valve (port TS)
6. Solenoid valve (ports S2, S3, S7, S8)
7. Solenoid valve (port S1)
8. Solenoid valve (ports S4, S6, S9)
9. Solenoid valve (port S5)
10. Solenoid coil (5 used)
11. Solenoid coil (5 used)
12. Nut
Figure 114
7
4
6
10
3
11
12
2
1
5
9
8
6
8
10
10
10
11
11
11
5ft--lb
(6.8 N--m)
20 ft--lb
(27 N--m)
25 ft--lb
(34 N--m)
20 ft--lb
(27 N--m)
25 ft--lb
(34 N--m)
25 ft--lb
(34 N--m)
20 ft--lb
(27 N--m)
20 ft--lb
(27 N--m)
5ft--lb
(6.8 N--m)
12
5ft--lb
(6.8 N--m)
12
12
5ft--lb
(6.8 N--m)
UP
20 ft--lb
(27 N--m)
NOTE: The ports on the lift control manifold are marked
for easy identification of components (e.g. P is the gear
pump connection port and R1 is the relief valve port).
See Hydraulic Schematics in Chapter 9 -- Foldout Draw-
ings to identify the function of the hydraulic lines and car-
tridge valves at each port location.