user manual

Groundsmaster 4100--D Page 5 -- 15 Electrical System
Transport / 4WD Switch
The transport/4WD switch is used to set the machine
tractionspeed fortransportor mow. Thetransport/4WD
rocker switch is located on the control console next to
the operator seat (Fig. 21).
Testing
TheswitchterminalsareshowninFigure22.Thecircuit-
ry of the switches is shown in the chart below. With the
use ofa multimeter (ohms setting), the switchfunctions
may be tested to determine whether continuity exists
between the various terminals for each position. Verify
continuity between switch terminals.
SWITCH
POSITION
NORMAL
CIRCUITS
OTHER
CIRCUITS
TRANSPORT 2+3 5+6
MOW 1+2 4+5
1. Control console 2. Transport/4WD switch
Figure 21
1
2
Figure 22
BACK OF TRANSPORT / 4WD SWITCH
132
456
Electrical
System