user manual

Groundsmaster 4100--D Page 7 -- 11 Chassis

NOTE: Most of the seat suspension components can

be serviced with the seat suspension base mounted to

theframeplatform.Iftheairspringassembly(item6)re-

quiresremoval,theseatsuspensionbasewillhavetobe

removed from the seat platform.

Disassembly (Fig. 9)

1. Remove operator seat from seat suspension (see

Operator Seat Removal in this section).

2. Iftheairspringassembly(item6) orbaseplate(item

37) requires removal, remove seat suspension from

seat platform (see Operator Seat Removal in this sec-

tion).

3. Remove seat suspension components as needed

using Figure 9 as a guide.

Assembly (Fig. 9)

1. Installall removedseatsuspension componentsus-

ing Figure 9 as a guide.

2. Install seat suspension if it was removed from seat

platform (seeOperator SeatInstallation in thissection):

3. Install operatorseatto seatsuspension( see Opera-

tor Seat Installation in this section).

4. Make sure that seat electrical connectors are s e-

cured to machine wire harness (Fig. 10).

1. Operator seat

2. Seat switch connector

3. Suspension connector

Figure 10

Chassis