user manual

Groundsmaster 4100--DCutting Deck
Page 8 -- 8
NOTE: Installationofclevispinstodeckandheight--of--
cut chains is easier if deck is lifted slightly.
4. Install clevis pins and hairpins that secure the
height--of--cut chainstothe rearofthecuttingdeck (Fig.
2).
5. Remove plugs from hydraulic hoses and fittings on
wingdeckliftcylinders.Attachhydraulichosestoliftcyl-
inders.
6. Connect cutting deck wireharness to mainmachine
wire harness (Fig. 5).
7. Position dampers to lift arms. Install clevis pins and
hairpins to secure dampers to lift arms (Fig. 3).
8. Install any removed cutting deck covers.
9. Install hydraulic motors to cutting deck (see Cutting
DeckMotor Installationin theServiceand RepairsSec-
tion of Chapter 4 -- Hydraulic System).
10.Lubricate grease fittings on cutting deck and lift as-
semblies.
11.Fill reservoir with hydraulic fluid as required.
1. Cutting deck wire harness connection
Figure 5
1