Installation and Programming Guide
25
Set Water Budget per Program
Step 1 – Turn the Function dial to the SET PROGRAM position.
Step 2 – Enter the program number (1–8) being modied. Press the to activate the selection.
Step 3 – Press the button.
Step 4 – Enter the desired water budget percentage for the selected program. You can decrease the program’s watering
to 0% (no watering) or increase it up to 200%. Press the button to accept the water budget modication.
Example: Increase Program 1’s watering budget to 150%. Press the button and enter to set
budget at 150%. Press to accept.
Step 5 – Repeat steps 2–4 to modify additional program water budgets.
The Monthly percent adjustment and the water budget percentage will multiply together to get the net
increase or decrease of the watering cycle.
Step 6 – Return the Function dial to the Auto Run position to exit SET PROGRAM.