Installation and Programming Guide

Option 10

Option 10 is used in conjunction with the Start Sensor and Program 1. Whenever the Start Sensor is triggered, Program

1 will activate immediately. Program 1 will repeat the cycle continuously until the start sensor is deactivated. All other

programs will not be affected and will activate as scheduled.

Activate Option 10

Step 1 – Turn the Function dial to the Options position. Press the or button until Option 10 is displayed.

Step 2 – Use the or button to activate or deactivate Option 10. When activated, program 1 will start when the

start sensor is triggered.

If program 1 has no value, the controller will function normally.

Step 3 – Return the Function dial to the Auto Run position to exit Options.

Option 11

Option 11 is used to activate or deactivate the master valve during station delays.

Activate Option 11

Step 1 – Turn the Function dial to the Options position. Press the or button until Option 11 is displayed.

Step 2 – Use the or button to toggle Master Valve function from ON or OFF during station delays.

Step 3 – Return the Function dial to the Auto Run position to exit Options.