Installation and Programming Guide

34
Remote Control (Purchased Separately)
The MC-E is equipped with two remote control ports to be used with the Toro Sentinel
TM
Remote Central System and
hand-held maintenance remote controls.
Maintenance Remote Controls
The MC-E can be remotely operated using any of the following
remote control systems:
• KwikStart
®
Remote (KSR-KIT-K) Control System
• Contractor Maintenance Remote (CMR-KIT) Control System
• Eicon’s Maintenance Remote Control System
• Remote Control Technology’s Remote Control System
Step 1 – Verify that the Function dial is in the Auto Run
position.
Step 2 – Secure the remote control system’s receiver cable to the MC-E KSR/CMR remote socket. Remote system such
as the KwikStart will require an adapter cable to install. Refer to the remote control system’s installation and
operation instructions for additional information.
Activate Sentinel Remote Central System
The Toro Sentinel
TM
Remote Central System is designed to communicate with the MC-E controller using the Toro MC
Link remote device.
When the function dial is placed in the Remote Control position, MC-E will immediately stop all activities and it will start
receiving Sentinel commands. As long as the function dial is in the Remote Control position, all scheduled programs are
ignored and the 5-pin KwikStart Remote (KSR)/Contractor Maintenance Remote (CMR) port is disabled. The MC-E will
only operate based on commands received from the Sentinel central.
Step 1 – Secure the 6-Pin ribbon data cable from the MC Link remote device to the MC-E Sentinel remote socket.
Step 2 – Turn the Function dial to the Remote Control position. Leave the dial at the remote control position to
keep the MC-E under Sentinel control.
Step 3 –
Return the Function dial to the Auto Run position to exit Sentinel’s Remote Control communication.
VALVE
COMMON
VALVE
COMMON
VALVE
COMMON
MASTER
VALVE
YEL RED
VALVE
COMMON
GND
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42
1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47
2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48
INHIBIT SENSOR START SENSOR FLOW SENSOR
KSR/CMR
Remote Socket
Sentinel
Remote Socket