Installation and Programming Guide

Power On / Reset Mode

MC-E will initiate the operating system and reload all saved data in the memory for stable operation every time the

controller is powered up. Turn the Function Dial in the Auto/Run position for normal operation.

Initial Display Auto Run Mode Display

System SETUP

The SETUP function allows you to modify the following MC-E parameters:

• Current Date • Current Time

• Security Password • Event Days

• Enable/Disable Master Valve

SETUP – Current Date

Set Current Date

Step 1 – Turn the Function dial to the SETUP position.

Step 2 – Press the or the button to access the date setup screen.

Step 3 – Enter the Month, Date and Year in MM DD YY format. If the MC-E is operating in International format, enter

the Date rst, the Month second and the year last (DD MM YY).

Example: For February 20, 2006, press the 022006 buttons.

Step 4 – Press the button to accept the changes. The display will now reect the new date.

While in SET DATE mode, you can advance to the SET TIME mode by pressing

the NEXT button.

Step 5 – Return the Function dial to the Auto Run position to exit SETUP.