Data Sheet
Neptune
Flat Emitter Dripline
Micro-Irrigation
FEATURES & BENEFITS
• Highly resistant to plugging – Discrete
emitters stand up to challenging water and
organic fertilizers
• Ultra-high strength and durability – Strength
and flexibility make for easy installation
and removal, saving on time and labor, and
significantly reducing chances of damage
• Blue Stripe of Toro quality – Blue stripe
installed up insures proper outlet placement
• Precision performance – Excellent Cv ≤ 3%
• Five different flow rates available – Nominal
0.16, 0.25, 0.30, 0.47, and 0.75 GPH
• Available in 8, 10, 13, 15 and 18 mil wall
thicknesses
• Available in popular 5/8” and 7/8” internal
diameters
• Compatible with all Toro Pro Loc™ tape
fittings
• Operating pressure between 6-30 PSI,
depending on ID and wall thickness
• 120 mesh filtration required
Neptune is ideal for use in demanding applications where
thicker walled products can provide greater durability such as
subsurface drip irrigation (SDI). The exceptional durability of
the materials selected for this product makes installation and
retrieval easier and extends the useful life of the Neptune. The
discrete emitter in the flat emitter dripline resists plugging and
is a good choice for applications expected to last. Neptune can
stand up to rocky and abrasive soils that require a thicker tube,
and it is ideal for semi-permanent applications in which the
tubing needs to withstand pruning and harvest damage.
Neptune
part numbering system
Length
I.D.
Wall
Thickness
Example: TW 5 10 12 16 – 620
Reel length in 10 ft
Emitter flow rate in GPH
Emitter Spacing in inches
Wall thickness in mil
Internal diameter in inches, 5/8"
Neptune product
Note: Install Neptune with blue stripe up.