Specifications

102
2015 Toro Commercial Equipment Guide 15-003-T Rev. 2/15
Pro Force
TM
The Pro Force™ is a self-contained engine-driven Debris Blower operated with a hand-held wireless RF controller. It utilizes
a high-efficiency turbine-type fan assembly designed to deliver greater air power to clear turf or pavement of leaves, grass
clippings, twigs, pine needles or other undesirable debris.
PRO FORCE DEBRIS BLOWER, MODEL 44538*
ENGINE
27 hp Kohler
®
Command Pro™ 725cc, gas, 2-cylinder, air-cooled, electronically-governed.
AIR FLOW
In 3rd party independent testing, per the ANSI/AMCA 210-07 standard for Laboratory Methods of Testing Fans for Certified Aerodynamic Performance Rating, the Pro
Force test results demonstrated greater air flow volume, than any other single nozzle turbine-type debris blower currently on the market.
FAN DESIGN
High efficiency, axial flow, turbine-type fan assembly.
CONTROL
Hand held wireless RF controller provides capability to start and stop the engine, adjust engine throttle up and down for high to low RPM range of operation, and
rotate nozzle 360 degrees in either direction. Ergonomic, weather resistant.
NOZZLE
Single-piece impact-resistant plastic with 13” outlet diameter.
ROTOR DIAMETER
14”
FAN ASSEMBLY DIAMETER
14”
WEIGHT
475 lbs.
LENGTH
Standard 97” from adjustable tow hitch to nozzle outlet. 18” adjustable length for length range of 79”-115”
WIDTH
48”
HEIGHT
Standard 33”. 6” adjustable height for height range of 27”-39”.
TOW-BEHIND TRAILER
Lawn-tractor style hitch (Category 1).
TIRE SIZE:
20 x 10-8, 4-ply turf tire.
FENDERS
Custom injection molded plastic.
WARRANTY
Two-year or 1,500 hour limited warranty*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
The Pro Force is manufactured
in Tomah, WI ISO 9002 Certified Plant.