Product Datasheet

Rake-O-Vac

FEATURES

A clean sweep.

The Rake-O-Vac’s Kohler

23 hp engine insures there is plenty of

horsepower to clean debris from the most difficult turf. A spring-loaded

flex tip reel provides exceptional sweeping performance especially

with those annoying pine needles. The large 4.75 cubic yard hopper

provides plenty of capacity for picking up large areas. Compact and

maneuverable, the Toro Rake-O-Vac clears debris from even the

tightest areas. The rugged impeller fan pulverizes leaves and

debris saving space in the hopper yet the airflow in the

hopper minimizes dust by directing it back to the ground

keeping your neighbors happy.

Call your Toro distributor at 1-800-803-8676

8111 Lyndale Ave. S.

Bloomington, MN 55420-1196

Printed in the U.S.A. Rev. 2/13

• Spring-Loaded Flex Tip Reel –

Flexible nylon fingers brush the ground

clear of debris utilizing a spring-loaded

design to give the fingers an extra kick

for clearing debris in wet conditions

• Optional Broom Reel provides

additional sweeping power

• 23 hp (17.2 kW) Kohler

Command Pro

engine

• 4.75 cubic yard (3.6 cubic meter) capacity

• New airflow

system delivers a

cleaner sweeping

environment

PAGE 1
Rake-O-Vac ® f e a t u r e s •2 3 hp (17.2 kW) Kohler Command Pro engine ® ® • 4.75 cubic yard (3.6 cubic meter) capacity A clean sweep. The Rake-O-Vac’s Kohler 23 hp engine insures there is plenty of ® horsepower to clean debris from the most difficult turf. A spring-loaded flex tip reel provides exceptional sweeping performance especially with those annoying pine needles. The large 4.75 cubic yard hopper provides plenty of capacity for picking up large areas.
PAGE 2
Rake-O-Vac Specifications* ® RAKE-O-VAC ENGINE DRIVE, MODEL 07055 POWER SUPPLy Kohler Command Pro CH680, 23 hp (17.2 kW) @ 3600 rpm, 4 cycle, air-cooled, V-twin cylinders, horizontal crankshaft with a 5.5" (14 cm) dry centrifugal clutch. Compression ratio: 8.5:1. Overhead placement valves; intake, forged high carbon steel, exhaust Stellite faced. Hydraulic valve lifters. Full pressure 4 pint (2.3 liter) with filter, oil capacity. 12-volt, 15 amp alternator with solid state regulator/rectifier.