RM5010 Series Product Features & Advantages
Value Proposition • Hundreds of improvements.
Operator Comfort Control Console • Controls and indicators are conveniently located on the armrest • Allows operator to hinge back the console for right hand entry and exit • Sensitive electronics are protected inside console – Plug in for diagnostics with the same hand held tool
Operator Comfort • Tilt steering • Step entry and exit • Deluxe seat suspension – Air-ride option • Noise reduction • Standard headlights • Improved visibility
Mow / Transport Selector • Mow speed limiter – New to industry • Located next to the traction pedal • Flip up to enable cutting units and mow speed • Adjust mowing speed by changing spacers – Each spacer is approximately ½ MPH.
CrossTrax® All-wheel Drive – Optional Kit • Based on patented Series /Parallel drive system • Transfers power from the front tires to the opposite rear tires for optimum traction on slopes • Can’t spin out unless downhill tire spins also
Stretched Rear Axle • Wheels are aligned to prevent tire tracking • Eliminates the gap between the front and rear tires • Looks like one tire track instead of two distinct tires • More visually appealing
Front tire track Rear tire track Tire track gap
Lighter Weight • • • • • • • Less parts, more functionality Plastic and aluminum rollers Plastic hood Eliminated metal fenders Eliminated frame rail Aluminum steps Wheel motors vs.
Fairway Mower Weight Comparison 3500 3000 2500 P o u n d s 2000 1500 1000 500 0 Weight Jake 1880 RM5210 RM5410 Jake 3400 RM5510 RM5610 Jake 3800 RM6500 Deere 3225C Deere 3235C 2224 2396 2505 2580 2693 2756 2790 3100 3260 3324
Fairway Mower Weight Comparison (2WD Units) New 5010 Models 2396 Difference RM5200 / 5210 Current 5000 Models 2522 RM5400 / 5410 2550 2505 -45 RM5500 / 5510 2962 2693 -269 -126
Significant Improvements • Larger displacement hydrostatic pump – Lower pressure, heat and noise – Lower strain on working components for longer life • Dedicated steering and lift pumps allows simultaneous lift and turn • Positive shutoff reel circuit for safety
Significant Improvements • Grass shields cover front tire rims – Prevents clippings from building up in rim and spilling out in rows or clumps • Jack stands double as tie down points • Rear tie down points
Serviceability • Easy access to all service components • Routine service is conducted from left hand side of unit • Increased fin spacing radiator • Tip out oil cooler w/o tools
Tractor Accessories • TurfDefender Leak Detector – Senses leaks and shuts down the cutting unit circuit – Allows use of traction circuit to get off turf • 4 post ROPS conversion kit available from Jodale Perry
Cutting Unit Suspension System • New suspension system uses no down pressure springs • Allows from 0 to 15 lbs.
Fairway DPA (Dual Precision Adjustment) • Platform design for 5” & 7” fairway cutting units • Aluminum backbone and ductile iron side plates • Bolt together, precision machined cutting unit frame • Easier to get HOC right and hold the adjustment • Easy to set and hold knife attitude
Harder Reel Blade Material • Scalloped reel blade profile with hardened steel and austempered heat treatment – Same material and heat treatment as greens except thicker profile – Reduced land width for wear and horsepower reduction – Reduces the need for a relief grind
Harder Bedknife Material • EdgeMax™ bedknife includes a leading edge of harder steel – Holds an edge up to 3 times longer – Cuts the need for adjustments, backlapping and grinding by up to two-thirds
Compression Molded Wiehle Roller • Engineered polymer is lightweight and wear resistant • Molded over an aluminum tube for straightness and rigidity • Reduces the weight of the front roller by 10 lbs.
Roller Length Changes • On the 5” cutting unit – rear rollers are shortened and aligned to prevent double roll marks – 7” cutting units have standard length rollers but can be configured with optional shorter rollers
Roller Length Changes • Front rollers are lengthened to provide support to the ends of the bedknife • Prevents gouging and scalping • Longer Wiehle front roller is standard on 5” and 7” cutting units
Cutting Unit Accessories • Groomer with Quick Set™ and fine adjust - patent pending – No tools required to engage • Broomer™ option for groomer - patent pending – Brush strips nest into the helix of the groomer blades and provide full width “brooming” action to remove dew and lift canopy for superior quality of cut and aftercut appearance
Cutting Unit Accessories • Integrated rear roller brush design – 2000 rpm - 37% faster – Steel covers – Better bearing and seal package • Platform verticutter with carbide tipped blades (5” & 7” size) • Grass baskets (Common for 5010) • Combs, scrapers, rollers, etc.
