User's Manual

12
Checking the range: Computer
location to the controller.
• Place the controller, plugged in and upright, at the approximate
location at which it will be mounted in the garage. If the controller’s
AUTO ON indicator light is not on, press the AUTO ON button to
turn on the light.
• Take the handheld remote to the location of the computer within the
home.
• Press any button to wake up the remote. It should then
automatically contact the controller and then display the signal
strength icon in the upper right hand corner of the display and
“AUTO” to indicate the controller is in AUTO ON mode.
• Press the remote’s AUTO OFF button. The display should
momentarily show “SENDING” then “ACCEPTED” and then “OFF”
to indicate you have turned off the controller.
• You now know the locations of components for your PC Control
system are within range of each other.
• Now you can install the controller.