Sell Sheet

SAND PRO 2040Z, MODEL 08706
ENGINE
Kawasaki 2 cylinder, air cooled, gasoline engine; Gross HP 13.6 HP (10.1 kW), Governed HP 12.2 HP (9.1 kW) @ 2400 rpm; Max torque 27.3 ft-lbs (37.0 Nm)
@1800 rpm; Displacement 36.7 cu-in. (603 cc); Oil capacity w/filter 1.7qts. w/filter (1.5 w/o filter); Oil Filter External, spin-on
AIR CLEANER SYSTEM
Heavy duty single stage cyclonic air filter with replacement element
FUEL CAPACITY
4.5 gals (17 liters) of unleaded gas (maximum 10% ethanol)
TRACTION DRIVE
Belt driven independent infinitely variable unitized transmission, with automatic tensioning system.
HYDRAULIC OIL
Factory fill Mobil fluid 424 tractor transmission fluid; Left hand transmission section: 3.1qt (3.25 liters); Right hand transmission section: 3.55 qt (3.75 liters)
GROUND SPEED
Forward 0-12 mph (0-19.3 km/h), Reverse 0-4 mph (0-6.4 km/h)
With optional speed limiter(Model 08720) installed: Forward 0-7 mph (0-11.3 km/h), Reverse 0-4 mph (0-6.4 km/h)
TIRES/WHEELS
Drive Wheels 25x12- 9, 3 ply rating pneumatic tubeless demountable with a Turf Tamer (knobby) tread. Front Wheel 16x7.5-8 4 ply rating pneumatic tubeless
demountable with turf traction tread. Recommended tire pressure: 7 psi all tires
MAIN FRAME
Rectangular structured steel tube and high strength steel plate welded construction.
BRAKES
Twin levers with dynamic braking through hydrostatic transmission. Hand actuated parking brake lever that controls two integral wet disc brakes contained within
transmission.
STEERING
Power steering, controlled through two independent control sticks with integrated dampeners. Min. turning radius: 0 in (0 cm)
CONTROLS/GAUGES
Ignition: Off/Run/Start; Throttle: Low - High Idle; Choke: Open /Closes choke plate; Parking Brake: Off - On
LCD logic cluster includes hour meter and safety interlocks for operator presence, neutral and parking brake.
REAR ATTACHMENT
HYDRAULIC LIFT
Raise/Lower switch mounted at end of right handle.
SEAT
High back cushion vinyl seat with drain hole, integrated armrest and retractable seat belt; adjustment is 4 inches fore and aft.
ROPS
Two post fixed ROPS, certified per ISO/DIS 21299.2 specifications
STORAGE
Built-in cup holder, rake holder and personal storage reached from seat.
ELECTRICAL FEATURES
12-volt system, 20-amp alternator at 3600rpm. Battery Voltage is displayed when key switch is moved from off to run (Low Battery LED will illuminate if key
voltage is less than 12.3V in run position)
SOUND LEVEL
88dBA (Operator Ear)
DIMENSIONS/WEIGHT
with Flex Tooth Rake with Nail Drag
Length: 89.0 in (226 cm) 84.8 in (215 cm)
Width: 84.0 in (213 cm) 71.5 in (182 cm)
Overall Height: 73.0 in (185 cm) 73.0 in (185 cm)
Weight: 920 lbs (417 kg) 970 lbs (439 kg)
Wheelbase: 58.0 in 147 cm
Tread width (to centerline of tire): 46.9 in (119 cm)
GROUND CLEARANCE
5.5 in (14 cm) (at machine centerline 24 in tire)
TIE DOWNS
Four loops, one located on each corner of the machine.
WARRANTY
2-year limited warranty. Refer to the Operator’s Manual for further details.
SAFETY CERTIFICATIONS
Certified to meet ANSI specification B71.4 - 2012 standards when equipped with weight kits supplied with attachments. Certified to meet ISO/DIS 21299 for ROPS.
Engine meets all applicable emission standards per the manufacturer. Certified to meetC-Tick 2004/108/EC/(EMC) and the CE Machinery Directive.
Sand Pro
®
2040Z Specifications*
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.