Owner's Manual

Secure Mode (Continued)
Command Operation
CCC 3
Sending this command will step from the currently operating station
to the next higher station number. As an example, if station 16 of
unit 555 is currently in operation and the
555 3 command is
transmitted, station 16 will stop and station 17 will begin operation.
CCC 1 Sending this command will step from the currently operating station
to the next
lower station number. As an example, if station 16 of unit
555 is currently in operation and the 555 1 command is transmitted,
station 16 will stop and station 15 will initiate operation.
CCC
*
Send a
CCC
*
command to turn-off the last station that was turned-
on. If station 16 was the last station energized on unit 555 and a
555
*
command was transmitted, station 16 will stop operation.
CCC nn
*
Sending this command allows you to turn-off individual stations. As
an example, to turn-off station 16 of unit 555, send a
555 16
*
.
CCC
* *
To turn off multiple stations that are in operation within a specified
unit, send a
CCC
* *
, where
CCC specifies the satellite unit.
CCC nn dd
*
Use this command to place a station in Rain OFF for a specified
number of days. Entering
555 16 05
*
command will disable station
16 (
nn) of Satellite unit 555 (CCC) for 5 (dd) days.
Sequence Related Commands Under Secure Mode
Command Operation
CCC 00 h tt
If running a sequence of stations, use this command to set the run
time duration. As an example, sending 555 00 1 30 command
instructs satellite unit 555 to run a sequence for 1 hour and
30 minutes.
CCC nn # Send this command to start irrigation for all stations in sequence,
where CCC is the satellite unit and nn is the first station to irrigate in
sequence.
CCC 3 # Sending this command will increment the currently operating station
in sequence. As an example, if station 16 of unit 555 is currently in
operation and the
555 3 # command is transmitted, station 16 will
stop and station 17 will initiate operation.
CCC 1 # Sending this command will decrement the currently operating station
in sequence. As an example, if station 16 of unit 555 is currently in
operation and the
555 1 # command is transmitted, station 16 will
stop and station 15 will initiate operation.
CCC 00 # Sending 555 00 # will stop satellite unit 555’s sequence operation.
9
Action
Set sequence time.
Start sequence operation.
Increment sequence.
Decrement sequence.
Stop sequence operation.
Action
Increment operation to the
next station.
Decrement operation to the
next station.
Turn Off last station
energized.
Turn Off a specific station.
Turn Off all stations in
operation within a specified
satellite unit.
Place a station in Rain Off.