System Guide

3. Some SMTP servers require a user Authentication in order to send

e-mail. If required, select either SMTP or POP-before-SMTP. If not

required, select None Required from the drop down menu.

4. Both authentication options require a user name and password to be

entered. Enter a

User name and Password in the text boxes provided

5. Two Mail To options are provided. Select All notifications sent to: to direct

all e-mail to the address(es) entered in this window. Or select Notifications

sent to individual addresses specified for each station:

to direct

individual weather monitoring sources to specific e-mail address.

Note: When entering multiple e-mail address, a semicolon or comma must be

used (without spaces) between recipients. If you are not sure which separator

to use, some trial and error may be required to send a successful test e-mail.

6. Once all of the notification information is entered, choose the Send Test

Notification to these addresses:

to verify proper set up and functionality.

Note: Sending e-mail in HTML format is not currently supported.

Logging Tab

The setup options pr

ovided on the

Logging tab enable you to name the data

log file and select the preferred method of organizing data entries.

1. Enter a name for the data log file (must have an .rtf file extension.)

2. For Log File Options, choose Append new logs to file to compile an all-

inclusinve file for data log entries, or Create a new log daily to record a

new data log file each day. (Daily log files will be dated for identification.)

3. Choose the Log Results box to automatically select data logging for all

screens that offer the Log Results option.

The Startup Tab

The settings on the Startup tab are used during startup and initialization.

The selections in the

Unit List deter

mine the behavior of the Selection panel

database tree

Lea

e the

Filter bo

x b

lank to list all satellites in the database

Or, to filter (limit) the database tree to only satellites within a specific System,

choose the System Descr

iption from the drop-down menu.