System Guide

7. To remove satellites from the System Contents list, use the same procedure

as adding satellites, with the exception of using the Right arrow buttons.

8. To change the System description,

Choose the Edit Systems button

open the

Edit Window.

9. Type in a new System description, and

choose OK.

Part 2 – Working with Multiple Satellites

The database tree in the Selection panel should now list all Systems by name.

The Systems Database Tree functions in the same manner as the Satellites

Database Tree.

As indicated in the in a side-by-side database tree comparison below, the

System shares the same database windows as the Satellites with the exception

of individual satellite setup, programming, map and graph features. In other

words, where Satellite operations are performed at the Program level, System

operations are performed at the Satellite level.

System Level Operations

1. Choose the Systems tab of the Selection panel.

2. Choose the

System name to expand the database tree.

Note: In the following example, the Time & Day window is opened for a

System named East Park.

3. Choose the Time & Day window form the Setup directory to open the

Time & Day window.

4. Choose the Send Time/Day Synchronize button. The Sentinel WMS will

check and synchronize every satellite of the East Park system to the

computer’s time and day. An action report will be generated and displayed

in the Synchronize Results: panel.

Note: The results information is color coded: Green indicates Ok, Blue and

Black are informational and Red indicates a problem was identified.