User's Manual

Hit the Down Arrow ( ), once to access the Utility Submenu and the first submenu

option of Time & Day:

Hit Enter ( ) to access the Time & Day Edit Mode:

You are now in the Edit Mode and can change the Time, Day, and Schedule Week in the

controller. As in the example display above, the first digit of the hour should be have the

cursor under it, indicating you can change this value. Use the Numeric keys to change the

Time. The cursor will automatically advance to the next digit, or you can use the Right

and Left Arrow keys ( , or ), to move the cursor.

Use the Up or Down Arrow keys ( , ) to change from AM (A) to PM (P) as

necessary, when the cursor is on the A/P.

Use the Up or Down Arrow keys ( , ) to change the Day of the week when the

cursor is on the day.

Use the Up or Down Arrow keys ( , eek (schedule week) when the

cursor is on the week position. When initially programming the controller, set it to Week

1 (W1).

) to change the W

it the Escape key to exit to the Utility Submenu, Time & Day option:

When all changes are made, hit the ENTER key ( ) to save changes.