User's Manual

Hit the Down Arrow ( ), once to access the submenu option of Day Change Hour:

IMPORTANT: From this point forward in the User’s Guide, we will not show step-by

step the navigation through the Main Menu and the Submenus and into the Edit Mode

for each submenu. Navigation, editing, cursor movement, etc, works the same for all

functions in controller programming.

Note: You must remember to hit ENTER () after changes have been made, or your

changes will not be saved.

UTILITY → Day Change Hour → Edit Mode

Sentinel allows you to choose the hour you want the controller to advance to the next

day. As an example, the day would change from Monday to Tuesday at midnight. You

can command the controller to wait until 8 AM Tuesday before it changes to Tuesday.

This way, the controller will have until 8 AM Tuesday to finish all watering cycles on the

Monday schedule.

To set the Day Change Hour, position the cursor under the item to be changed and edit as

desired using the numeric keys on the keypad. Use the Up and Down Arrow keys ( ,

) for the AM/PM toggle field. Press the ENTER key ( ) to save after editing.

UTILITY → Unit Code → Edit Mode

Every controller must have a three digit code assigned to it. This is known as the

controller’s address. You may select any three digit code from 000 to 999. This is the

identifier that is used when selecting an individual field controller with the hand held

radio or from the central controller.