User's Manual

Position the cursor using the Right and Left Arrow keys ( , or ) under the digit being

dited. Use the numeric keys on the keypad to ) to save after

ANT: The unit code is required for Central Control operations. Even if most

f the satellite programming will be from the central software, you need to set the Unit

TILITY → Station Count → Edit Mode

Use this menu to inform the controller the number of stations it has. The Sentinel

on increments (12, 24, 36, or 48).

e edit. Press ENTER key (

editing.

IMPORT

Code.

controllers typically have station counts in 12-stati

Use the Up and Down Arrow keys ( , ) to scroll through the station count options

nd specify the number of stations in the controller. Press the ENTER key ( ) to save

→ Edit Mode

This menu item allows you to configure the master valve/pump start output for either

after editing.

TILITY → N/O Master U

normally open or normally closed operation.

Use the Up and Down Arrow keys ( , ) to toggle between Normally: CLOSED and

ormally: OPEN options. Press the ENTER key ( ) to save after editing.