User's Manual

Use the CLUSTER/SCHEDULE SELECT ( ) and the PROGRAM SELECT ( )
keys to select the desired cluster & program, respectively. Use the Left and Right Arrow
keys ( , ) to position the cursor under the field being edited and edit as desired.
Use the Up and Down Arrow keys ( , ) to select the Start Time to edit (ST 1, ST2,…
ST 8).
Use the Numeric Keys to set the time.
o eliminate a start time, press the OFF / NO key ( ).
) to save the Start Time.
ROGRAM DATA → Slot-Stn-Time → Edit Mode
ller is
e method used to organize and control satellite station outputs within each irrigation
rogram Slots are organized in a
quential matrix from Slot 1 to Slot 48, for a total of 48 slot positions.
ra ot 1 and ends at Slot 48. Stations are
ssigned to a slot and given a run time duration ranging from 0 to 4 Hour and 15 Minutes.
assigned to slots in any
ssignment, will
in a matrix as follows:
Use the Up and Down Arrow keys ( , ) to toggle to the A (AM) or P (PM).
T
Press ENTER (
P
One of the most unique and powerful programming features of the Sentinel Contro
th
program. This method is referred to as “Program Sl .” Pots
se
he program ope ting sequence begins at SlT
a
Station numbers range from 0 (inactive) to 48. Stations can be
order and as many times as preferred (that is, one station can appear multiple times in the
48 Slots of one program, if desired.
.
When an irrigation program is running, any slot with 0 (or blank) run time is ignored. A
slot with an assigned run time duration ≥1 minute, but without a station a
create a pause in the watering cycle for the assigned duration.
Sentinel programming allows you to reconfigure the operating order of the stations by
enabling any station to be assigned to any slot.
Visually, the Slots can be represented
16