User's Manual

PROGRAM DATA → Continuous Run → Edit Mode
Selecting Continuous Run will automatically repeat the program cycle continuously for
the defined Water Window duration.
The controller is capable of running any one or combination of programs continuously.
nd OFF keys to turn continuous run on and off.
ress ENTER to save. Use Water Windows below to set up continuous run start and stops
automatically.
PROGRAM DATA → Water Window → Edit Mode
The Water Window is the period of time in a 24-hour day that automatic watering can
ccur. Selecting a From and To time defines the Water Window start time, duration and
To manually start the desired cluster program, use the same procedure as in Auto
Slot/Stn. Use the CLUSTER SELECT and the PROGRAM SELECT keys to select the
esired cluster program. Use the ON ad
P
o
end time. A program that is running at the end of the Water Window is automatically
terminated.
Use the CLUSTER SELECT and the PROGRAM SELECT keys to select the desired
cluster program. Position the cursor under FROM or TO and toggle using the Up and
Down arrow keys. Use the Right and Left arrow keys to position the cursor under the
ime digit to t
u
be edited and edit as desired. Use the Right arrow key to place the cursor
nder the A (AM) or P (PM) field. Press ENTER to save. Pressing the OFF key will clear
the water window entry. Press ENTER after any change to save.
PROGRAM DATA → Selected Schedule → Edit Mode
Up to 16 unique watering day schedules can be defined in the controller. For
entification, each schedule has a number assignment ranging from 1–16. each program id
must be assigned a schedule in order to run.
19