User's Manual

Rain Off Days

This menu item allows you to disable any program for a specific number of days. Select

the Rain Off Days menu using the Right and Left arrow key. Use the CLUSTER

SELECT and the PROGRAM SELECT keys to select the desired cluster program. Use

the Right and Left arrow keys to place the cursor under the digit being changed (the

number of days you want to activate rain shut down). Use the number keys on the keypad

to edit the digit as desired. Press the ENTER key to save the new rain day value.

All Manuals Off (Manual Stations Off)

Selecting this from the menu system provides a quick way to turn off any stations that

have been turned on manually without having to select each station individually. If more

than one manual station is on, the controller will turn off one station at a time every five

seconds to prevent the possibility of water hammer. Select All

Manuals Off from the main menu using the Right and Left arrow key. Press ENTER to

activate.

All Autos Off (Manual / Auto Programs Off)

Selecting this menu item will provide an automatic method to turn off any automatic

programs (or manually started programs) that may be running. To activate, select this

item from the main menu and press ENTER. One program will be shut down every five

seconds. The display will show DONE when the process is complete.

Stn Days Off

Station Days Off - Selecting this menu item allows you to disable individual stations for

the number of days desired. Choose Stn Days Off from the main menu. Select the station

number by placing the cursor under the station number.

Specify the amount of days off by entering it under the three digit rain days. Press the

ENTER key to save the new value. The rain days will automatically decrease by one each

day until the days off is zero. The station will then resume normal operation.

II. UTILITY MENU

• Program Clear

• Wireless Group

• Map Unit Precode

• Two-Wire / Irritrol Mode

Program Clear

This menu allows you to set all of the slot/station times within a selected program to zero.

Select the cluster program to be cleared using the CLUSTER SELECT and the

PROGRAM SELECT keys. Clear the selected program by toggling to ON and pressing

the ENTER key. This function is helpful when clearing all 16 programs.