User's Manual

Current Flow

Selecting this menu item will display the current flow meter reading in gallons per

minute. Press ENTER to update the display as often as desired.

Expected Flows

This menu allows you to enter/edit the Expected Flow values (in gallons per minute) for

individual stations. Use the Up and Down arrow keys to select stations and the Right and

Left arrow keys to position the cursor under the digit being edited. Edit as desired and

press ENTER to save the flow value. The controller will use expected flow values to

calculate and provide a display of expected flow next to the actual flow in the controller

display.

Expected flow values will be displayed even if there is no flow meter to collect and read

actual flow values.

Maximum Flows

This menu allows you to specify/enter the maximum flow values in gallons per minute

for each individual station. Use the Up and Down arrow keys to select the station and the

Right and Left arrow keys to position the cursor under the digit being edited. Edit as

desired and press ENTER to save the flow value. The maximum flow may be obtained

(as a suggestion) by adding a percentage to the expected flow value. The percentage

added will vary with system design, size and personal preferences. This maximum flow

value will be used by the controller to check for flow-violating stations and to prevent

their operation if an unacceptable flow condition occurs.

Flow Processing

This menu allows you to turn the flow processing functions off or on. After choosing this

menu, toggle the Up or Down arrows to off or on and press ENTER.

Note: Do not turn on flow processing if it is not properly set up.

Read Flow Totals

To look at the current month’s water usage, previous month’s water usage or the previous

year’s water usage. Select Read Flow Totals from the menu and toggle the Up and Down

arrows and the Left and Right arrows to view the desired information.