User's Manual

CLUSTER / SCHEDULE

SELECT Key

This button will be

described in more detail in

later parts of this guide.

Used for selecting Clusters

(groups of 4 programs) or

schedules (run days) when

programming.

PROGRAM SELECT Key

This button will be

described in more detail in

later pars of this guide.

Used for selecting the

Program (1-4) associated

with a Clusters when

programming.

Also included are four F-keys provided on the control module keypad to conveniently

perform the following functions:

F1 Key - Displays the time.

F2 Key - Displays the status of the automatic programs.

F3 Key - Shuts down anything that is running (panic button).

IMPORTANT: The F3 key is not functional while in the Edit mode.

F4 Key - Displays context sensitive help while in the Edit mode.

Sentinel Control Module Display

The Sentinel Controller has a two-line LCD for display of information. When you first

walk up to your Sentinel controller, the display should be in its standard mode showing

current time, day, week (of schedule), actual flow (if anything running) and expected

flow. This display should look something like the following:

This display (as shown) indicates:

Upper Line Lower Line

Time – 07:18 P (7:18 PM)

Day – MO (Monday)

Week (of schedule) – W1 (Week 1)

Sensor – No current sensor indication

Remote – L (Locked)

Actual Flow – 00000 (0 GPM)

Expected Flow – 00000 (0 GPM)

Flow Status – No current flow indicator

Alarm Status – A (Alarm Exists)