User's Manual

• Start Times

• Slot-Station-Time

• Percent Scale

• Repeats

• Repeat Delay time

• Continuous Run

• Water Window

• Assigned Schedule

• Plant Factor

• Application Rate

• Default ET

• Maximum ET

• Program ET Toggle

• Station Type

• Map Stations

The controller normal mode (default) screen looks like:

• To enter the Main Menu from this default screen, you need to hit any of the arrow

keys on the keypad: , , or This will bring up the OPERATIONS op

of the Main menu.

, . tion

• To navigate through the Main Menu, use the right or left arrow keys: or .

• To enter a submenu for any of the Main menu options, use the up or down arrow

keys: or .

• When the desired submenu is reached, press the enter key to view or change data

in the submenu.

IMPORTANT: When entering data into one of the submenus, the controller is in the

Edit Mode. The controller will not begin any scheduled operation until you have exited

the Edit Mode. Programs that are running prior to entering the Edit Mode will

continue running. Any time you enter or change any data, you must press the

ENTER key to save the data. Otherwise, the newly entered data will not be saved.

To exit the Edit Mode, press the ESC Escape) key once or twice as necessary

to return to normal mode (default) screen. If you forget to press the ESC key, the

controller will automatically revert to normal mode after two minutes.