Addendum

ManualsBrandsToro ManualsMisc.Service Bulletins

FormNo.3439-466RevA

Workman

GTXGasoline/PetrolorEFIUtility

Vehicle

Addendum

Ifyouhavemorethan1machine,makeacopyofthisAddendum,andaddittoyourOperator'sManual(s).

AccessthelatestOperator'sManual(s)foryourmachineatwww.Toro.com.

AddthisAddendumtoyourOperator’sManualifyouhaveoneofthefollowingOperator’sManuals:

•3407-497(RevAorB)

•3409-811(RevA,B,C,D,orE)

•3421-347(RevA)

•3422-123(RevA)

•3422-243(RevA)

•3432-231(RevA)

•3436-759(RevA)

•3437-802(RevA)

•3437-807(RevA)

CrossouttheexistingRecommendedMaintenanceSchedule(s)tableinyourOperator'sManualandreplace

itwiththetableshownbelow.

RecommendedMaintenanceSchedule(s)

MaintenanceServiceInterval

MaintenanceProcedure

Aftertherst5hours•Changetheengineoil.

•Checktheconditionofthedrivebelt.

Aftertherst8hours

•Checkthetensionofthestarter-generatorbelt.

Aftertherst50hours•Checktheairlterforthecarboncanister.

Aftertherst100hours•Performtheguidelinesforbreakinginanewmachine.

•Inspecttheseatbelt(s)forwear,cuts,andotherdamage.

Replacetheseatbelt(s)ifanycomponentdoesnotoperate

properly.

•Checkthetirepressure.

•Checktheengine-oillevel.

•Checkgear-shiftoperation.

•Checkthebrake-uidlevel.

Beforeeachuseordaily

•Washthemachine.

•Removetheair-cleanercoverandcleanoutthedebris.Donot

removetheair-cleanerelement.

•Cleanoutthedebrisinthedustcap.

•Underspecialoperatingconditions(refertoMaintainingthe

MachineunderSpecialOperatingConditions)—replacethe

air-cleanerelement.Replacetheair-cleanerelementsoonerif

dirtyordamaged.

Every50hours

•Underspecialoperatingconditions(refertoMaintainingthe

MachineunderSpecialOperatingConditions)—changethe

engineoil.

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3439-466*A

Summary of content (4 pages)

PAGE 1
Form No. 3439-466 Rev A Workman® GTX Gasoline/Petrol or EFI Utility Vehicle Addendum If you have more than 1 machine, make a copy of this Addendum, and add it to your Operator's Manual(s). Access the latest Operator's Manual(s) for your machine at www.Toro.com.
PAGE 2
Recommended Maintenance Schedule(s) (cont'd.) • Grease the bearings and bushings. • Under normal operating conditions—replace the air-cleaner element. Replace the air-cleaner element sooner if dirty or damaged. • Under normal operating conditions—change the engine oil. • Check the spark plug. • Check the condition of the tires and rims. • Torque the wheel-lug nuts. Every 100 hours • Inspect the steering and suspension for loose or damaged components. • Check the front wheel camber and toe-in.
PAGE 3
PAGE 4
Insert the following procedure into the Drive System Maintenance section of your Operator’s Manual. Inspecting the Steering and Suspension Components Service Interval: Every 100 hours—Inspect the steering and suspension for loose or damaged components. With the steering wheel at the centered position (Figure 1), turn the steering wheel to the left or right.