Outdoor Timer User Manual

Turn the control dial to the program start time

position.

Check the programs switch setting. If necessary,

reposition the switch to select the desired program.

Program start time number 1 will begin flashing. The

current program start time or OFF will be displayed

for start time number 1. To select a different program

start time number, press the +/on or the –/off button

until the desired number is flashing.

Note: The numbers (1–4) shown at the top of the dis-

play designate program start times and should not be

confused with zone numbers. The zone numbers will be

shown at the bottom of the display when setting zone run

time.

Press the next button. The hour digit(s) or OFF will

begin flashing.

Note:

To remove the start time, select OFF by

pressing the +/on and –/off buttons at the same

time, and continue at step .

To set the hour (and am/pm), press the +/on or the

–/

off button until the desired hour is flashing.

Press the next button. The minute digits will begin

flashing.

To set the minutes, press the +/on or –/off button

until the desired minute is flashing.

Press the next button. The next program start time

number will begin flashing.

To select another start time number, press the +/on

or the –/off button until the desired start time num-

ber is flashing.

10. To set, change or remove a program start time for

the start time number selected, repeat all of the

steps starting at step .

11. To set program start times for another program,

repeat all of the steps starting at step .

Return the control dial to the run position.

Setting Program Start Times

3 5 7 9

4 5 6 7

3 75 9