Outdoor Timer User Manual

Changes in season and temperature generally require a

change in zone run time to maintain a healthy landscape

and conserve water. The Season Adjust feature enables

you to change the run time of all zones assigned to a

program, simultaneously up or down, in 10% increments

– with just the press of a button. Adjustments can be

reduced to 10% or increased to 200% of the programmed

run time of each zone.

A 50% setting, for example, would decrease a 20-minute

zone run time to 10 minutes. Increases however, work

a little differently. With any adjustment above 100%, the

ECXTRA will first increase the run time by the adjust-

ment percentage, then split the time in half and run the

watering program twice. This allows the water to soak

in instead of pooling or running off. For example, adjust-

ing to 150% would first increase a 20-minute zone run

time to 30 minutes, then split the time in half and run two

watering cycles back-to-back with 15 minutes in each

operation. During operation the % symbol will flash to

indicate a multiple watering operation.

Note: All zone run times are retained in the timer memory

and returned to their set value when the season adjust is

reset to 100%. The only time a zone run time will appear

changed is during operation.

Turn the control dial to the

season adjust posi-

tion. The season adjust display will be shown and

100% will be flashing.

Check the programs switch setting. If necessary,

reposition the switch to select the desired program.

Press the +/on or –/off until the desired adjustment

value is flashing.

4. To apply the Season Adjust feature to another pro-

gram, repeat steps and .

Return the control dial the run position.

Note: The Season Adjust symbol will be displayed in

all dial positions as a reminder that this feature is in use.

Using the Season Adjust Feature