Installation Instructions
Performance Data - U.S.
(§) NPT inlet, includes nozzle/stator set 1–4 (‡) BSP inlet, includes nozzle/stator set 1–9 (ƒ) NPT inlet, includes nozzle/stator set 5–8
Performance Data - Metric
Note: Toro service tool model 995-99 (or 5/8″ nut driver) is required for main nozzle exchange. For Intermediate nozzle
exchange and main nozzle trajectory adjustment, Toro service tool model 995-105 (or 5/16″ nut driver) is required.
Stator Replacement
1. Remove cap set screw with a small slotted or phillips screwdriver.
2. Unscrew and remove cap. Remove seal assembly, spring, and riser
assembly (1).
3. Unscrew debris screen/check valve assembly (2) and remove from
riser assembly.
4. Slide stator assembly (3) out of riser assembly and replace with
alternate stator.
5. Reassemble sprinkler components in reverse order.
TS90 Series Sprinkler
Installation & Adjustment Guide
Specifications
• Threaded inlet: 1″ NPT or 25mm BSP
• Pop-up height: 4″ (12,7cm)
• Pop-up height to spray: 3.5″ (8,89cm)
• Overall height: 12.5″ (31,75cm)
• Retracted height: 8.5″ (21,59cm)
• Ratcheting riser
• Spray arc: 360° and adjustable 40°–330°
• Main nozzle trajectory: adjustable 7°–30°
• Nozzle options: 9 Main, 3 Intermediate, 1 Inner
• Radius: 53′–95′ (16,15m–28,97m) @ 25° trajectory
• Flow rate: 13.9–61.6 GPM (52,6–233,2 LPM)
• Precipitation rate: 0.56–0.60″/hr (14,2–15,2mm/hr)
• Minimum pressure: 40 psi (2,7 bar)
• Maximum pressure: 100 psi (6,9 bar)
• Recommended pressure: 50–100 psi (3,4—6,9 bar)
• Check valve elevation rating: 6′ (1,8m)
• Stator/Drive: Constant velocity
• Rubber cover (nozzle turret)
Main / Intermediate
@ 50 psi
@ 60 psi
@ 70 psi
@ 80 psi
@ 90 psi
@ 100 psi
Stator
Type
Radius (ft) GPM Radius (ft) GPM Radius (ft) GPM Radius (ft) GPM Radius (ft) GPM Radius (ft) GPM
#1 - Yellow Blue
#2 - Blue Red
#3 - Brown Orange
#4 - Orange Orange
#5 - Green Blue
#6 - Gray Blue
#7 - Black Orange
#8 - Red Blue
#9 - Beige Blue
13.9
18.7
20.7
27.7
29.7
31.1
34.8
38.4
43.5
53
55
54
69
69
72
71
73
75
54
59
57
72
73
76
78
78
81
55
61
60
74
78
81
79
83
83
15.2
20.5
22.7
30.2
32.6
34.3
38.1
42.0
47.6
16.4
55
17.4
54
18.5
56
19.4
22.1 59 23.6 59
25.0
62
26.3
24.5 61 26.1 63
27.6
68
29.1
32.7 80 35.1 81
36.9
82
38.9
35.2 79 37.7 82
39.9
84
41.8
36.9
82
39.6
86
41.9
87
44.1
41.1
80 43.6
87
46.2
84
48.6
45.3 86
48.5
88
51.4
88
54.1
51.4 85 55.1 91
58.3
95
61.6
Low
Low
Low
Low
Medium
Medium
Medium
Medium
High
Nozzle Set
(§)
TS90TP-02-14
(ƒ)
TS90TP-02-58
(‡)
TS90TP-52
Configuration
Sprinkler Model
1
3
2
Figure 1
Low
Medium
High
Main / Intermediate
@ 3,4 bar
@ 4,1 bar
@ 4,8 bar
@ 5,5 bar
@ 6,2 bar
@ 6,9 bar
Stator
Type
Radius (m) LPM Radius (m) LPM Radius (m) LPM Radius (m) LPM Radius (m) LPM Radius (m) LPM
#1 - Yellow Blue
#2 - Blue Red
#3 - Brown Orange
#4 - Orange Orange
#5 - Green Blue
#6 - Gray Blue
#7 - Black Orange
#8 - Red Blue
#9 - Beige Blue
Low
Low
Low
Low
Medium
Medium
Medium
Medium
High
Nozzle Set
(§)
TS90TP-02-14
(ƒ)
TS90TP-02-58
(‡)
TS90TP-52
16,2 53
16,5 58 16,8 62 16,8 66 16,5 70 17,1 74
16,8 71
18,0 77 18,6 84 18,0 89 18,0 95 18,9 99
16,5 78
17,4 86 18,3 93 18,6 99 19,2 105 20,7 110
21,0 105
21,9 114 22,6 124 24,4 133 24,7 140 25,0 147
21,0 112
22,3 123 23,8 133 24,1 143 25,0 151 25,6 158
21,9 118
23,2 130 24,7 140 25,0 150 26,2 159 26,5 167
21,6 132
23,8 144 24,1 156 24,4 165 26,5 175 25,6 184
22,3 145
23,8 159 25,3 171 26,2 184 26,8 195 26,8 205
22,9 165
24,7 180 25,3 195 25,9 208 27,7 221 29,0 233
Configuration
Sprinkler Model
+