MARACAY ROCKING CHAIR No assembly required.
Very Important! Please Read Before Installing Runners. When attaching runners, only finger tighten each bolt several turns before screwing down completely. Securing and tightening one bolt at a time will create fitting issues and potentially strip out the bolt hole on the opposite end. Tortuga Outdoor – 495 Brown Ind. Pkwy. – Canton, GA – 30114 - Phone 678-880-6065 Hours M-F 8:30am-4:30pm EST - customerservice@tortugaoutdoor.
Runner Installation: PLEASE READ
STEP 1: Make sure runner holes align on each leg of both sides.
STEP 2: If holes do not align use a rubber mallet or comparable tool to slightly move leg into position.
STEP 3: Make sure bolt is aligned straight, the threaded hole is aluminum and could be stripped if not aligned properly. Only finger tighten each bolt several turns before screwing down completely.