TOSCA BATHROOM FAUCET WITH LED LIGHT AND PUSH POP-UP DRAIN ASSEMBLY TB-CH-T Polished chrome finish TBD1-BN-T Brushed nickel finish TBD1-MB-T Matte black finish PACKAGE AND HARDWARE CONTENTS Faucet body Deck plate and gasket Mounting nut Metal washer Rubber washer Push pop-up drain assembly A SAFETY INFORMATION Pleas read and understand this entire manual before attempting to assemble, operas or Install the product. 'WARNING + Protect your eyes with safety glasses when cutting or daring water supply lines.
PRODUCT SPECIFICATIONS Max. Flow Rate: 1.2 GPM (4.5 LPM) at 60 PSI Ceramic cartridge B125 NSF 61-9 Manufactured to include no more than 0.25% weighted average lead content on whetted surfaces Polished chrome, brushed nickel or matte black finish Total weight 355 lbs. ASSEMBLY INSTRUCTIONS 1. 3. Insert the faucet body (A) Turn off water at the supply valve under tha sink or at tha main water suf Disconnect the ly lines. s e e Clean and dry the surface area where tha naw faucet will be mounted.
ASSEMBLY INSTRUCTIONS 9. Attach each of the remaining ends of the cater supp e 1o the hox (red stripe) and cold water (blue stripe) lines coming from the metal Shank (9.1) on the faucet body (A). Hand tighten the supply line connection. Repeat for the second supply line. Do not use FEET pipe tape, rides dy apiiosiieid saliva on e meter et of heads. Additional compound ks not necessary.A watertight seal between the threaded et and the supply line is achieved by compression.
ESPECIFICACIONES DEL PRODUCTO ESPECIFICACIONES ESPECIFICACIONES Max, Caudal 1,2 GPM (454 LPM) a 60 FSI Cartucho de cerámica B125 NSF 61-9 Fabricado a incluir o mis de 0.25% de contenido de plomo promedio ponderado en superficies mojadas Cromo pulla, níquel cepillado o negro mate acabado Peso total: 3.55 Ibs. INSTRUCCIONES DE MONTAJE I Cierre Ia llave de paso debajo del lavabo o a llave principar de provisión da agua. Desconecta los tubos de suministro de agua y erre ¢l grifo viejo.