Quick Start Manual
Toscana Dynamic
QUICKSTART MANUAL
Before you begin controlling the Pergola, connect it to a Wi-Fi network, finish setup, and then share control
with the final user. To do this, follow the steps below:
1. Assemble the pergola
Fully Assemble the pergola without connecting the transmission bar to the motor.
2. Download the Toscana Dynamic APP
To download the Toscana Dynamic app, go to the app store on your mobile device and search for “Toscana
Dynamic” Then select and download the app. You can also select a link below:
• For Iphone:
https://apps.apple.com/gt/app/toscana-dynamic/id1583821175
• For Android:
https://play.google.com/store/apps/details?id=com.toscanaglobal.dynamic
3. Login with installer credentials
For administrative tasks such as configuring the pergola you have con access with an administrative account,
please ask the authorized partner if don’t have an account.
4. Verify Pergola Connections
Ensure all the connections are made correctly, also plug the wireless antenna for RF remote controller. Check
the wiring diagram for detailed reference.
5. Connect the pergola to a power source
Connect the main power, after a few seconds the Dynamic will enter pairing mode, and you should hear 3
beeps on the device, (if you don’t hear the beeps, check the wiring and power)
6. Register Dynamic
On the app, go to the register dynamic option and follow the steps to connect to the wireless network, follow
the installer manual for detailed steps.
7. Pair remote control
On the app, select the remote control, click on the pair button you will hear a beep, then, on the remote
control hold up and down buttons for 5 seconds and then release, you should hear two beeps, now you can
click on the pair button again to finish pairing. follow the installer manual for detailed steps and remote
control usage references.
8. Setup Motor
Select the motor and click on the edit button on the left corner, then click on the setup option and follow the
steps to define the limits of the operation of the pergola.
9. Register device and share to the client
Click on the options menu of the pergola (3 dots on the right top corner) and click on register again to share
with the client, register all the information including client email, your client will receive an invite to install the
Toscana Dynamic APP to control their device.