APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A OPERATING INSTRUCTIONS TABLE OF CONTENTS PAGE 1. 2. FUNCTIONS 1-1 External View of the Unit 1-2 Function of Keys and Controls 1-3 LCD Readout Indication Items 2 3 4 OPERATION 2-1 Basic Operation 2-2 Placing Telephone Calls 2-3 End to End Signaling 2-4 Call Time Display 5 6 6 6 3. INPORTANT SAFETY INFORMATION 7 4. WARNING 7 5.
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A 1.
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A 2-2 FUNCTION OF KEYS AND CONTROLS Key-Board Arrangement To enter a Telephone Numbers, Names or Digit Keys special characters. is also used for One Touch Emergency feature. Function Keys To originate or receive a Call. To terminate a Call and to turn the Unit ON/OFF. To recall phone numbers from memory. To be used with other Keys to activate several special Features. To control Earpiece audio level, Alert Tone and key Tone.
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A 2-3 LCD READOUT INDICATION ITEMS Item Description Receiving Signal Strength Indicator. The number of lines indicates the received Signal Strength, and is also used as a POWER ON Indicator. Digital Mode Indicator. To indicate the phone is operating in digital mode. A Call is in process. No Service Indicator. The phone cannot receive signals. The phone is out of the Home-Area. Message indicator.
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A 3. OPERATION 3-1 BASIC OPERATION Turning the Unit On Press the switch. The indicator will light (all indicators will light momentarily and then shows your Telephone Number, and a Tone will be heard). Note: To turn the Unit OFF, press again for about one second. * Signal Strength Indicator This enables you to know the Signal Strength in your Area. The number of the shaded blocks indicates it, and four blocks is the maximum level.
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A Volume Control An Audio Level of the Alert Tone, Earpiese and the Key Tone can be adjusted by the Volume Control Buttons. Earpiece: Keep pressing or Button until the moderate Sound Level is got. Alert Tone Level will be displayed on the Readout digitally during the level adjustment and the Sample Tone will help you to know the Sound Level when not engaged in a Telephone Conversation. 3-2 PLACING TELEPHONE CALLS To Place a Call 1.
APPLICANT: TOSHIBA CORPORATION Press The , then , Cumulative TRANSCEIVER TYPE: CJ6DCE49203A , , Talk Time will be displayed as follows. 1H 23M 45S ... 1hour 23min. and 45sec. 4. IMPORTANT SAFETY INFORMATION Please read and follow these Cautions carefully: TURN OFF your Unit in an explosive atmosphere (near a fuel pump, blasting area, etc.). DO NOT dial when your vehicle is moving in those states where this action is illegal (this is not a prudent practice, even where it is legal).
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A 5. FCC RF EXPOSURE INFORMATION Consumer Information on SAR: THIS MODEL PHONE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
APPLICANT: TOSHIBA CORPORATION TRANSCEIVER TYPE: CJ6DCE49203A SAFETY INFORMATION: FCC RF EXPOSURE INFORMATION In August 1996 the Federal Communication Commission (FCC) of the United States with is action in repot and order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitter. Those guidelines are consistent with the safety standards bodies.