User Manual

68
? LCD/EXTERNAL DISPLAY
Q
Nothing appears on the LCD.
(The Power
LED is unlit or flashing in orange.)
A
Your computer is not turned on or on Standby.
Press the power switch.
(The Power
LED is lit.)
A
The automatic display suspension function may have been activated.
Do either of the following:
• Press the Shift
or Ctrl key.
• Move the Accupoint II.
TIP: • If an external display is connected, it may take about 10 seconds to turn on the
display but this is not an error.
A
The instant security function may have been activated.
Do the following:
If protection with the password is not activated:
Press the Shift
or Ctrl key or move the Accupoint II.
If protection with the password is activated ([Protect with the password] or [Return to the
Welcome to Windows window at restart] is checked on the [Screen Saver] tab of the
[Display Properties] window):
(1) Press the Shift
or Ctrl key or move the Accupoint II.
If multiple users are registered, click a user name.
(2) Enter the Windows log-on password on the password input window and press the
Enter
key.
REFERENCE: For information on the instant security function, see “3-1 Special function keys
with the Fn
key” in Chapter 3.
REFERENCE: For information on the Windows log-on password, see “Online Manual”.
A
The display device may not be properly set up.
Press the Fn
+ F5 keys for at least three seconds.
Your computer’s LCD is activated.
REFERENCE: For more information, see “9 External display” in Chapter 3.