User Manual

69
Q
The LCD shows unclear images.
A
Adjust the angle of the LCD.
Q
The LCD is dark.
A
Brightness setting of the LCD may be low.
Take either of the following procedures to change the setting.
•
Method 1
• Press the Fn
+ F7 keys to increase the brightness.
Press the Fn
+ F6 keys to decrease the brightness.
•
Method 2
(1) Open the [Control Panel] window and click [Performance and Maintenance].
(2) Click [Toshiba Power Saving].
(3) Select desired power saving mode on the [Power Settings] tab and click the
[Advanced] button.
(4) Adjust [Monitor Brightness] on the [Power Saving] tab.
(5) Click the [OK] button.
(6) Click the [OK] button on the [Toshiba Power Saving Properties] window.
If the above procedures do not increase the LCD brightness, the FL tube (the cold cathode
tube) mounted in the LCD for side lighting may have been worn. Check the model of your
computer and contact the nearest maintenance service. A service fee will be charged for the
replacement work.
Q
The colors on the LCD are not clear.
A
This occurs when a small number is specified for the colors.
To change the setting, follow the steps below:
(1) Open the [Control Panel] window and click [Appearance and Themes].
(2) Click [Display].
The [Display Properties] window appears.
(3) Specify “Maximum (32 bit)” for [Colors] on the [Settings] tab.
(4) Click the [OK] button.
TIP: • “Maximum” may not be available depending on the resolution.