User Manual

83
? LAN FEATURE
Q
I cannot connect to a network.
A
The network settings may be incorrect.
Check the following:
• Windows network settings
• Settings for the destination network device (HUB)
• Conditions of the cable
A
The LAN feature may be disabled.
Take either of the following procedures to change the settings.
•
Method 1 - Using [Network Device Switch]
(For the model with the wireless LAN feature only)
(1) Click [Start] → [All Programs] → [Network Device Switch] → [Network Device
Switch].
(2) Click the [Network Device Switch] icon on the Notification area and click the
device that you want to use in the menu.
The wired LAN feature is displayed as [Realtek RTL8139/810X Family Fast
Ethernet NIC].
The wireless LAN feature is displayed as [Toshiba Wireless LAN Mini PCI Card].
•
Method 2 - Using [Device Manager]
(1) Open the [Control Panel] and click [Performance and Maintenance].
(2) Click [System].
The [System Properties] window appears.
(3) Click [Device Manager] on the [Hardware] tab.
(4) Double-click [Network Adapters].
The wired LAN feature is displayed as [Realtek RTL8139/810X Family Fast
Ethernet NIC].
The wireless LAN feature is displayed as [Toshiba Wireless LAN Mini PCI Card]
(for the model with the wireless LAN feature only).
Options marked with X (
) on the left are disabled.
Follow the steps below to change the setting.
(5) Right-click the option that you want to use and click [Enable] in the menu.
(6) Close the [Device Manager] window.
(7) Click the [OK] button on the [System Properties] window.