User's Manual

Available APs and Ad Hoc Networks Icons
Double-click on a network name to connect an available network. If no configuration
profile exists for that network, double-click on the network name to create a
configuration profile for that network.
The following table describes the columns found in the Available APs and Ad Hoc
Networks list.
Column Item Description
Network Name
(SSID)
The IEEE 802.11a wireless network name (service set
identification).
Configure the network name on the General tab.
Security Specifies the current state of security.
Signal Strength The received signal strength indicator. Displays the signal strength
in either dB or %, as well as the signal strength indicator.
Channel Specifies the current channel of operation.
Wireless Mode Displays the wireless mode. The options include 5 GHz 54 Mbps, 5
GHz 108 Mbps, or 2.4 GHz 11 Mbps.
Configure the wireless mode on the Advanced tab.