User's Manual

4-13

PERATING

ASICS

Changing to the laptop mode

You can change the above sequence in the following procedure:

(1) Double click Change tablet and pen settings icon in the Task Bar.

(2) Click Change button in Display tab.

(3) Change the sequence in Orientation Sequence Settings screen. Click

OK button.

NOTE: You can set the orientation of the desktop screen just after

rotating the display from

Start

−> −>

−>

All Programs

−> −>

−>

Tablet PC

−> −>

−>

TOSHIBA

Rotation Utility

Changing to the laptop mode

To change the Tablet mode to the laptop mode, follow the instructions below.

1. Press the Display latch and raise the display to the upright position carefully.

2. Rotate the display counter-clockwise slowly.

3. Turn the display latch toward you for the next closing of the display.

Using the USB FDD Kit

A 3 1/2" diskette drive connects to the computer’s USB port. It accommodates 1.44-

megabyte or 720-kilobyte diskettes. Refer to the Options section in Chapter 1,

Introduction, for more information.

NOTE: The USB FDD Kit is an option with some models.

Figure 4-13 The 3 1/2" USB FDD Kit

DISK-IN-USE

INDICATOR

DISKETTE SLOT

EJECT BUTTON

USB CONNECTOR