User's Manual

4-25

PERATING

ASICS

Using the internal modem

Region selection

Telecommunication regulations vary from one region to another, so you will need to

make sure the internal modem’s settings are correct for the region in which it will be

used.

1. Click start, point to All Programs, point to TOSHIBA, point to Network-

ing and click Modem Region Select.

NOTE: Do not use the Country/Region Select function in the Modem

setup utility in the Control Panel if the function is available. If you

change the Country/Region in the Control Panel, the change may not

take effect.

2. The Region Selection icon will appear in the Windows Task Bar.

3. Click the icon with the primary mouse button to display a list of regions that

the modem supports. A sub menu for telephony location information will also

be displayed. A check will appear next to the currently selected region and

telephony location.

4. Select a region from the region menu or a telephony location from the sub-

menu.

• When you click a region it becomes the modem’s region selection, and the

New Location for telephony will be set automatically.

• When you select a telephony location, the corresponding region is automati-

cally selected and it becomes the modem’s current region setting.

Properties menu

Click the icon with the secondary mouse button to display the following menu.

Setting

You can enable or disable the following settings:

AutoRun Mode

Region Select Utility starts automatically when you start up the operating

system.