UWB Pele Express Mini Card Users Guide CONTENTS « RIGHTS. i ons i 2 REGULATORY. NOTICES. si nso is SER 3 INTRODUCTION, i od 11 HARDWARE FEATURES 12 Svelte REQUIREMENTS. CONNECT THE UWE Pls Express Mini Card HARDWARE 10 3 EVK CONTROL CENTER (BCC) 3.4 RUNNING THE EVE CONTROL CENTER APPLICATION 32 SELECT TR INTERSCHOLASTIC i 32.1 SELECT THE DEVICE IDENTIFIER (ADDRESS) AND RIVE FREQUENCY CODES 322 RECEIVE WINDOW...
UWB Pele Express Mini Card Users Guide Rights Microsoft ‘and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other concentric: Question. and Wide. are registered trademarks of Uniquest Communications, Ing. No right; Sheen, or stutterer to such trademark is granted hereunder.
UWB UWB Pele Express Mini Card Users Guide Regulatory Notices This device complied with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
UWB Pele Express Mini Card Users Guide Introduction This document outlines how to install the Uniquest USB drivers and software of the UWB Pele Express Mini Card. One of the most important parts of this document is the driver and software installation procedure. Make sire to follow the Step: D by-sfep procedures. These procedures are proven to work. If followed, the setup: installation; and evaluation will go smoothly.
UWB UWB Pele Express Mini Card Users Guide Figure 3 «Select Setup Language Step 2: The W Iciest EVK Control Enter Setup wizard will start as shown in shown in Figure 4 Setup Uniquest EVK Control Center, Note: It is recommended that al user applications be closed while sunning the install shield; this will ensure that any ‘open work Is not unexpectedly closed or destroyed. Click *Next" to continent with the install Process.
UWB Pele Express Mini Card Users Guide pam sl itd 2 od speech bio the el fos Accept ie Agreement Step d An information window is shown with Instructions for this installation, Follow the instructions and click ‘Next! to continue the Install process.
UWB Pele Express Mini Card Users Guide Select Sta Menu Folder: Gobi Hos shooed Setup lace lhe compliant shoreline? Figure 7 Select Destination Location Step Next, the wizard will ask you to select whether you want to install the Application, Drivers, or Both. It is recommended they you Install both at this time. Select ‘Control center application and drivers” as shown in Figure 8 Select Components and click "Next" 10 continue the Installation.
UWB Pele Express Mini Card Users Guide Select Additional T asks Riel Tinniness task Anouilh be Seine Figure 9 Select Additional Tasks Step 8 The next window shows the destination location for the installation, as well as the components and installation tasks indicated in the previous steps: Verily the selections. If they are correct.
UWB Pele Express Mini Card Users Guide Completing the Toshiba WUSB-WIDY Setup Wizard Si ti ot shed i267, This apiarists oon Figure 11: ~ Click Finish to exit the installer. 2.3 Connect the UWB Pele Express Mini Card hardware After installing the drivers and software, it is now time to install) the hardware, Restart the PO.
UWB Pele Express Mini Card Users Guide Thi wea helps jo lanolin sifts For. Tonia SPASTIC WIN Sari HWA WUSS Dave: £25 tf your hardware came with an installation GI) Hope. Figure 13+ Tu stall front a Hist or specific location Select “Don’t search, Twill choose the driver to install” when it asks yo to choose your search and installation options. Click “next” to continue; Pleas: thanes ou search and lamentation vocations.
UWB Pele Express Mini Card Users Guide i Figure 15 = Click “ext” When it says “Completing the Found New Hardware Wizard,” select “finish.” 7 ivi the Found Naw Hardware Wizard : Thi wiz Hi Droid in fin San is Tor hiss POSTILION WILY Salivate a g ito. cs therewith. Figure 19 = Click finish to complete installing the driver The driver is installed according to procedure similar as for the following devices.
UWB Pele Express Mini Card Users Guide . It is recommended that you reboot at this tine. This tay not be required, but could be in some situations. NOTE: The first time you use EV control enter, windows may defect a new driver, select the driver directory in the installation directory if this occurs: (Default is: Files\WiQuestiWiQuest EVK Control Centerpiece ) 3 EVK Control Center (ECC) The EV Control Center (ECC) allows the user to perform the following: + Transmittance data packets at several Modulation D
UWB Pele Express Mini Card Users Guide directory in the directory. you chose: to ‘Install the test ‘app in (if you kept ihe default location. it is: Files\WiQuestWiQuest EVK Control Center'driver ): 3.1: Running the EVK Control Center Application Double-click the "Uniquest EVICT Control Cesttir™ icon iar your desktop, or: select Start = All Programs == Uniquest EVK Control Nectar Uniquest EVICT Control Center to start ECC. 3.
UWB Pele Express Mini Card Users Guide 3.2.2 Receive Window “The receive window displays information on all received packets: Figure 23 lust rates the features and functions of the Receive Window. The receive window Is split up into different sections. This multiple receive stream window provides details on the current receive stream. The system statistics section provides detailed statistics on ihe selected receive stream and for the entire system. By default the receive stream is 0.
UWB Pele Express Mini Card Users Guide RX Settings 1. Receive Stream # The active receive stream number: 2. Rx:Made « For the selected receive stream, the receiver can be placed Into different verification modes. a. Basie Verification = All received frames have their FCS value verified. by. Fw GRC Verification -All received frames have their firmware computed checksum verified. This is in addition to {he basic verification. 3.